Manualshelf

Operation Manual

ManualsBrandsPelco ManualsNetwork2 Megapixel Spectra Enhanced Low Light HD In-ceiling Environmental Network PTZ Dome Camera, 30X, Smoked, Black, US
21222324252627282930
28
3. Enter the IP address or host name of your LDAP server in the LDAP Server box.
4. Enter the port over which the camera communicates with the LDAP server in the LDAP Port box. The default port for LDAP commu-
nications is 389.
5. Enter the distinguished name (DN) that is the basis for LDAP searches in the Base DN box.
6. Provide the template to format the user name (provided when the user logs in to the camera) for searches in the LDAP directory in
the Bind DN Template box.
7. Provide the format for LDAP queries in the Search Template box. A search must match an entry in the LDAP user record to the bind
name (user name).
8. Enter the common name (CN) and DN for each access role Group Mappings for each of the camera’s four user groups. The group
mappings consist of the CN and DN of users to which you want to assign a particular access level role.
9. Enter the credentials of a user who can be authenticated through the LDAP server, using your LDAP settings, in the User and Pass-
word boxes.
NOTE: Remote Mode (LDAP authentication) will not be enabled if you leave these boxes blank or provide invalid credentials; this
ensures that you cannot lock yourself out of the camera with invalid or incorrect LDAP settings.
10. Click Save.