Operation Manual

30
Configuring a Park Action Event Source
A park action event source triggers an event if the camera is inactive for a specified period of time.
1. Select Sources from the Events menu.
2. Click New Source, or select the source you want to edit.
3. Provide a name, between 2 and 23 alphanumeric characters, for the event source in the Name box.
4. Select Park Action from the Type menu.
5. Configure the dwell time (the amount of inactivity before the event handler starts).
6. Click Submit.
Configuring a System Event Source
A system source triggers an event when your camera boots.
1. Select Sources from the Events menu.
2. Click New Source, or select the source you want to edit.
3. Provide a name, between 2 and 23 alphanumeric characters, for the event source in the Name box.
4. Select System from the Type menu.
5. (Optional) If available, select the handler(s) that you want to associate with this source.
6. Click Submit.
Configuring a Timer Event Source
A timer event source triggers an event at specified intervals of time.
1. Select Sources from the Events menu.
2. Click New Source, or select the source you want to edit.
3. Provide a name, between 2 and 23 alphanumeric characters, for the event source in the Name box.
4. Select Timer from the Type drop-down menu.
5. Configure the frequency of the event.
6. (Optional) If available, select the handler(s) that you want to associate with this source.
7. Click Submit.
Deleting an Event Source
1. Select Sources from the Events menu.
2. Select the source that you want to delete.
3. Click Delete Source to remove the event source.
Handlers
Event handlers are the actions that your camera takes when an event source occurs. The availability of handlers might change based on
your camera model.