Manualshelf

Operation Manual

ManualsBrandsPelco ManualsNetwork2 Megapixel Spectra Enhanced Low Light HD In-ceiling Environmental Network PTZ Dome Camera, 30X, Smoked, Black, US
31323334353637383940
37
The ideal scene selection for the Object Removal behavior is a clean background with stable lighting and minimal obstruction.
Stoped Vehicle
The Stopped Vehicle behavior detects vehicles stopped near a sensitive area, and sets an alarm if the vehicle is present for longer than
a user-specified period of time. This behavior is ideal for parking enforcement, identifying suspicious parking, finding traffic lane break-
downs, and spotting vehicles waiting at gates.
Ideal Scene for Stopped Vehicle
Install the camera in a ceiling or against a wall with the lens pointing at a slight downward angle, above regular motion activities.
The ideal scene for the Stopped Vehicle analytic behavior contains light traffic in which vehicles are continually moving, there are
minimal scene obstructions, and the background is clean. If heavy traffic or a busy background is unavoidable, place monitoring zones
relatively stable areas.
Avoid crowded scenes where people or objects remain in place for long periods of time.
Zones
Some analytic behaviors require you to configure zones. A zone is a defined boundary that your camera monitors for an analytic behavior.
A zone can be defined by a polygon or line. Zones defined by polygons trigger analytics based on motion within the zone; zones defined
by lines trigger analytic events when an object within the scene crosses the line.
When configuring a zone-based analytic behavior, you can draw zones by selecting one of the zone-drawing tools, and then clicking
within the scene to draw the zone.
NOTE:
• The availability of zone drawing tools is dependent on the analytic behavior you are configuring.
• Zones will not scale proportionally with changes in zoom. Set the zoom level for the camera before defining zones.
Box: Tracks objects in a defined zone and triggers an alarm if the objects move in the same direction as defined.
Polygon: Tracks objects in a defined zone and triggers an alarm if the objects move in the same direction as defined.
Line: Tracks objects that cross a line and triggers an alarm if the objects move in the same direction as defined.
Exclude Zone Box Tool: Ignores objects inside a defined zone.
Exclude Zone Polygon Tool: Ignores objects inside a defined zone.
Object Size Filter: Sets the minimum and maximum object size for a zone.
Display Size: Sets the size of a tracked object, relative to the surrounding scene, and maintains the size of the object
within the scene.