Manualshelf

Installation Manual

ManualsBrandsPelco ManualsNetwork2 Megapixel Spectra Enhanced Low Light HD In-ceiling Environmental Network PTZ Dome Camera, 30X, Clear, Black, US
12345678910
8
Installation Methods
You can install the Spectra Enhanced Series dome system using one of the following methods:
• Installation in a suspended ceiling or a fixed ceiling.
• Installation using a pendant mount (not supplied).
Installing the Back Box (In-Ceiling)
1. Locate the center point of the mounting location.
2. Insert the compass tool into the ceiling and draw a circle.
3. Cut out the circle.
4. Attach a conduit fitting (not supplied) and lock nut (not supplied).
5. Install a safety chain/cable (not supplied). The safety chain/cable should be capable of supporting up to 7.3 kg (16 lb).
6. Pull the wiring into the back box through the conduit fitting.
7. Install the back box:
a. Compress the spring clips and push the back box through the hole.
b. Tighten the screws until you hear a clicking noise.
Figure 1: Installing the Back Box: In-Ceiling Models
8. Connect the power wiring. Refer to the figure below and the Wiring topic for more information.
Figure 2: Power Wiring Connections: In-Ceiling Models