C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.book Page 3 Wednesday, January 19, 2005 12:46 PM Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Description . . . . . .
C1642M-A FT85011.book Page 4 Wednesday, January 19, 2005 12:46 PM Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1642M-A FT85011.book Page 5 Wednesday, January 19, 2005 12:46 PM Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
C1642M-A FT85011.book Page 6 Wednesday, January 19, 2005 12:46 PM CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other that contained in the operating instructions unless you are qualified to do so. The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
C1642M-A FT85011.book Page 7 Wednesday, January 19, 2005 12:46 PM Product Overview DESCRIPTION The FT85011/FR85011 fiber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber.
C1642M-A FT85011.book Page 8 Wednesday, January 19, 2005 12:46 PM • Standalone and rack-mountable modular design • LED indicators for monitoring of signal status, data activity, and operating power NOTES: • The FT85011 transmitter/FR85011 receiver is a Class 1 laser product that complies with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2, 2001-08.
C1642M-A FT85011.
C1642M-A FT85011.book Page 10 Wednesday, January 19, 2005 12:46 PM FRONT PANEL The front panel of the FT85011 transmitter and the FR85011 receiver provides LED indicators that allow you to monitor data activity, signal status, and operating power (refer to Figure 2). Tx Tx Rx Rx 1 FT85011 TRANSMITTER FR85011 RECEIVER Figure 2.
C1642M-A FT85011.book Page 11 Wednesday, January 19, 2005 12:46 PM REAR PANEL All connections to the FT85011 transmitter and FR85011 receiver are made to the rear panel of the modules (refer to Figure 3). 1 2 3 4 5 6 7 8 GND 1 2 3 0 9 8 7 4 5 6 1 2 3 0 1 2 3 4 5 6 7 8 GND 9 1 FT85011 TRANSMITTER 8 7 4 5 6 1 FR85011 RECEIVER Figure 3.
C1642M-A FT85011.book Page 12 Wednesday, January 19, 2005 12:46 PM Installation PACKAGE CONTENTS The following items are supplied: • With the FT85011 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC input, 12 VDC output 1 Wall clip with two 4-40 x .
C1642M-A FT85011.book Page 13 Wednesday, January 19, 2005 12:46 PM With the FT85011 transmitter/FR85011 receiver powered off, set the Data Selection switch to the required data communication using a small screwdriver. Refer to Table A for data communication switch settings. Table A.
C1642M-A FT85011.book Page 14 Wednesday, January 19, 2005 12:46 PM MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK Optional fiber rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack, are designed for installation of multiple modules: • The RK5000PS-3U fiber rack mount chassis provides 12 module slots and a power supply. • The RK5000-3U fiber rack mount chassis provides 14 module slots (a power supply is not included).
C1642M-A FT85011.book Page 15 Wednesday, January 19, 2005 12:46 PM UPPER FLANGE VERTICAL MOUNTING HOLE (2) HORIZONTAL MOUNTING HOLE (2) TRANSMITTER/ RECEIVER SCREW, PHILLIPS PAN HEAD WITH LOCK WASHER (2) WALL CLIP LOWER FLANGE Figure 5.
C1642M-A FT85011.book Page 16 Wednesday, January 19, 2005 12:46 PM CONNECTIONS Connections to the FT85011 transmitter and the FR85011 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone module. A 12 VDC power supply is provided.
C1642M-A FT85011.book Page 17 Wednesday, January 19, 2005 12:46 PM Table B.
C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.
C1642M-A FT85011.book Page 24 Wednesday, January 19, 2005 12:46 PM Troubleshooting LED indicators on the front panel of the FT85011 transmitter/FR85011 receiver (refer to Figure 2) allow you to monitor signal status, data activity, and operating power. Table C provides information about the front-panel indicators and associated troubleshooting guidelines. Table C. Troubleshooting with Front-Panel Indicators Indicator Color Meaning Possible Cause Power LED (Pelco badge) Blue Pelco logo lights.
C1642M-A FT85011.book Page 25 Wednesday, January 19, 2005 12:46 PM Table C. Troubleshooting with Front-Panel Indicators (Continued) Indicator Color Meaning Possible Cause Video Present LED (Continued) Red on receiver Incoming video signal is Optical signal is not not present on the being received from the channel. transmitter. Carrier Detect LED is also red. Video source is not powered on. Video source is not connected to the transmitter. Coaxial cable connected to the transmitter is defective.
C1642M-A FT85011.book Page 26 Wednesday, January 19, 2005 12:46 PM Table C. Troubleshooting with Front-Panel Indicators (Continued) Indicator Color Red on transmitter (continued) Red on receiver Meaning Possible Cause Carrier Detect LED (Continued) A problem exists with the optical power budget. The optical signal is not Transmitter is not being received from the powered on. transmitter. Fiber optic cable is not connected. Fiber optic cable connectors are dirty or are damaged.
C1642M-A FT85011.book Page 27 Wednesday, January 19, 2005 12:46 PM Table C. Troubleshooting with Front-Panel Indicators (Continued) Indicator Color Flashing amber Red Not lit Flashing amber Red Not lit C1642M-A (1/05) Meaning Possible Cause Data Tx LED Data is being — transmitted onto the fiber by the data port. Data Selection switch is Data Selection switch is set to an invalid setting. set to setting 6, 7, 8, or 9. Data is not being transmitted onto the fiber by the data port.
C1642M-A FT85011.book Page 28 Wednesday, January 19, 2005 12:46 PM Specifications VIDEO Number of Channels Modulation Type Video Input Bandwidth Gain Differential Gain Differential Phase Tilt Signal-to-Noise Ratio DATA Number of Channels Data Communication Maximum Baud Rate GENERAL Operating Temperature Input Power Requirements LED Indicators Dimensions Unit Weight MECHANICAL Connectors Video Rack Power/Alarm Standalone Power Data Fiber Optic 28 1 Pulse code modulation, 8-bit resolution 1.
C1642M-A FT85011.book Page 29 Wednesday, January 19, 2005 12:46 PM OPTICAL POWER BUDGET, TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Fiber Multimode Single-mode Wavelength Optical Power Budget Maximum Transmission Distance Laser Class 1 Limit* 1310 nm (video) 20 dB† 6 km (3.7 mi)‡ <15.6 mW † ‡ <0.78 mW 850 nm (data) 20 dB 1310 nm (video) 20 dB 30 km (18.6 mi)§ <15.6 mW 20 dB § <10.0 mW 1550 nm (data) 6 km (3.7 mi) 30 km (18.
C1642M-A FT85011.
C1642M-A FT85011.book Page 31 Wednesday, January 19, 2005 12:46 PM PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products and the following fixed camera models: CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and CC3651H-2X.
C1642M-A FT85011.book Page 32 Wednesday, January 19, 2005 12:46 PM ® Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.