Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C3415 / REVISED 12-21-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Stainless Steel Spectra
®
IV SE Series
BACK BOX AND LOWER DOME
Product Features
• All Stainless Steel Construction
• Built-in Back Box Memory
• Intregrated Passive UTP Circuit
• 7 Alarm Inputs; 2 Programmable Auxiliary Outputs
• Built-in Surge and Limited Lightning Protection
• Compatible with 29X and 36X Spectra
®
IV SE Dome Drives
• Bubble Constructed of Optically Clear Acrylic
• Environmental Pendant Model Only
• Indoor/Outdoor Applications
• Meets NEMA Type 4X and IP66 Standards
• Ability to Add IP Network Capability by Purchasing Optional TXB-N
Module
Pelco’s Stainless Steel Spectra
®
IV SE Series is designed for harsh
environmental installations and meets NEMA Type 4X and IP66 stan-
dards.
The components (back box and lower dome) provide added protection
against corrosive conditions. The pendant-style back box
(BB4-PSG-E) is constructed of Type 316þStainless Steel (SS) and
includes a sun shield (also constructed of Type 316 SS), heater, and
fan. The lower dome features a trim ring constructed of Type 316 SS
and an optically clear bubble that is available in smoked (LD53PSB-0)
or clear (LD53PSB-1) acrylic.
The Stainless Steel Spectra IV SE Series has all the features of
the Spectra IV SE dome system (built-in back box memory, two aux-
iliary outputs, seven alarm inputs) and is also compatible with all
Spectra IV SE dome drives.
Camera and lens options for the Stainless Steel Spectra IV SE
Series include:
–Day/night camera, 128X wide dynamic range, motion detection,
electronic image stabilization, image enhancement, LowLight
™
technology, and 36X optical zoom with 12X digital zoom
–Day/night camera, 128X wide dynamic range, motion detection,
LowLight technology, and 29X optical zoom with 12X digital zoom
For an alternative mounting option use the IDM4012SS wall mount.
The IDM4012SS mount is designed specifically for the Stainless
Steel Spectra IV SE Series and features all stainless steel construc-
tion and conduit access in the bottom and back of the mount.
8.52
(21.64)
10.90
(27.69)
5.90
(14.99)
5.83
(14.80)
6.75
(17.15)
TOP PORTION OF BACK BOX
IS REMOVABLE FOR SURFACE
MOUNT APPLICATIONS
DOME IS SECURED
TO CEILING BY
MOUNTING BRACKET
ENVIRONMENTAL PENDANT
BB4-PSG-E AND LD53PSB-1
(SHOWN WITH IDM4012SS WALL MOUNT)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.