User's Manual

Pelco Manual C2422M (5/00) 19
SPECIFICATIONS
MECHANICAL
Pan Movement: 360° continuous pan rotation
Vertical Tilt: Unobstructed +2° to -92°
Manual Pan/Tilt Speeds*
Pan: 0.5°-80°/sec manual operation, 150°/sec turbo
Tilt: 0.5°-40°/sec
Preset Speeds
Pan: 250°/sec
Tilt: 200°/sec
* For variable-speed operation an appropriate controller is required. With fixed-speed
controllers, pan/tilt speed is 24°/sec. The CM6700 controller with the KBD200 keyboard
has programmable fixed speeds.
CAMERA
Signal Format: NTSC (model DD5TAC)
PAL (model DD5TAC-X)
Scanning System: 2:1 interlace
Image Sensor: 1/4-inch interline transfer CCD
Effective Pixels
NTSC: 510 (H) x 492 (V)
PAL: 500 (H) x 582 (V)
Horizontal Resolution
NTSC: 380 TV lines
PAL: 370 TV lines
Lens
Minimum f-stop: F1.6
Focal Length: 3.9 mm to 63 mm optical
Zoom Ratio: 16 optical zoom
Digital Slow Shutter: Auto/manual speed selection
Horizontal
Angle of View: 44° (at 3.9 mm wide zoom), 3° (at 63 mm telephoto zoom)
MTBF: >1 million cycles at room temperature (zoom, focus, irs)
Focus: Automatic and manual override
Sensitivity: 1 lux at f1.6 at signal level of 40 IRE, gain high (AGC on)
Sync System: AC line lock, phase adjustable via remote control*
White Balance: Automatic with manual override*
Shutter Speed Automatic (electronic iris)/manual
NTSC: 1/60-1/10,000*
PAL: 1/50-1/10,000*
Iris Control: Automatic with manual override*
Gain Control: Automatic with manual override*
Video Output
NTSC: .714V ± .07V (100 IRE ± 10 IRE)
PAL: .7V ± .07V
Signal to Noise Ratio: >46 dB
* Manual control of camera setup functions can be done with CM6700, CM8500, CM9500,
CM9760 and MPT9500 controllers, but not with CM7500, MPT9000 or KBD9000 controllers.
(Design and product specifications subject to change without notice.)