user manual

TECHNICAL SPECIFICATIONS
GENERAL
Construction Aluminum with steel camera mounting
bracket and polycarbonate dome
Finish Light gray polyester powder coat
Light Attenuation
Smoked 1.5 F-stops light loss
Clear Zero light loss
Unit Weight 2.20 lb (1.00 kg)
Shipping Weight 4.0 lb (1.81 kg)
ELECTRICAL
Input Voltage* 12 VDC or 24 VAC (±10%), autosensing
Synchronization Internal or AC line lock
Power Consumption
Camera <3 W (DW/CW models)
< 4 W (DN/CH models)
Heaters 10 W when active; thermostatically controlled
MECHANICAL
Cable Entry One 0.75-inch (1.91 cm) NPT threaded
opening on side; two 0.75-inch (1.91 cm)
openings on base
Pan/Tilt Adjustment Manual
Pan 360°
Tilt 80° (20° to 100° range)
Rotation 360°
VIDEO
Signal System NTSC or PAL
Video Output
Composite 1 Vp-p, 75 ohms
UTP 1 Vp-p, 100 ohms
Video Connectors 1 composite BNC and 1 UTP
Service Connector 3-conductor, 2.5 mm connector for video
output to optional ICS-SC cable
ENVIRONMENTAL
Environment Low temperature, indoor/outdoor
Operating Temperature -50° to 122°F (-46° to 50°C);
de-ices to 25°F (-4°C)
Thermostat Operation Heater is thermostatically controlled to
activate ON at 50°F (10°C) and OFF at
80°F (27°C)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class B
• Meets NEMA Type 4X and IP66 standards
• U.S. Patents D476,025; 6,715,939 B2; 6,805,498 B2
5.50
(13.97)
3.79
(9.63)
4.01
(10.19)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.36
(6.00)
1.76
(4.47)
*24 VAC power is recommended when installing any Camclosure Integrated Camera System under fluorescent lighting conditions.