Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C4047 / Revised 9-06-18
International Standards
Organization Registered Firm;
ISO 9001 Quality System
EH20 Series Enclosure
COMPACT, INDOOR/ENVIRONMENTAL, IP-ENABLED
Product Features
• Side Opening for Easy Access for Servicing and Installation
• High Reliability Die-Cast Construction
• Advanced Optics for Megapixel Camera Support
• Temperature Range from –30° to 50°C (–22° to 122°F)
• Meets IP66 and Type 4X Standards
• IK10 Mechanical Impact Resistance, Vandal Resistant
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• 24VAC or Power Over Ethernet (PoE) or Mains Power Models
• All Models Include Heater and Blower (Except EH20 and EH20-M)
• All Models Include Sun Shroud and Mount (Except EH20)
The EH20 Series is a rugged and highly reliable camera enclosure
with a side-hinged lid and adjustable sun shroud designed for easy
installation. Constructed from die-cast aluminum to IK10 and IP66,
the EH20 Series enclosure is designed to operate in a wide range
of environments and to protect electronic components in
temperatures from –30° to 50°C (–22° to 122°F).
The EH20 Series enclosure is designed for use with analog and IP
cameras that have both fixed and variable focal length lenses (with
or without auto iris operation). The side-hinged lid provides easy
access to the camera sled. Two adjustable glands (PG11) on the
bottom of the enclosure allow for easy installation of the power and
video cables.
All EH20 Series enclosures come standard with heater and blower
(except EH20 and EH20-M), a cable management wall mount bracket,
and sun shroud (except EH20). The enclosure can also be ordered from
the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ether-
net enclosure input voltage, 802.3af-compatible camera power, and
appropriate heater and blower power.
The EH20 Series is ideal for small- to medium-size analog and IP
cameras and can be mounted to Pelco’s EM20 (feedthrough wall
mount).