DOME SETTINGS <alert>* <clear> <password> <clock> <event> LINE SYNC LINE SYNC LINE SYNC PHASE TOGGLE 1 TOGGLE 1 EDIT THE PASSWORD 1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-26.html>PAGE 26</a></h6><p>18X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* ENGLISH RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX DOME DRIVE MODEL XX-XXXX BACK BOX MEMORY AVAILABLE SOFTWARE VERSION XX.X BUILD FONT VERSION XX.X COMM XXXXXXXXXX D ADDRESS 1 P ADDRESS 2 CM95OO MODE OFF 32 PRESETS OFF PROTOCOL C PRESSURIZED* X.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-27.html>PAGE 27</a></h6><p>DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> LINE SYNC LINE SYNC LINE SYNC PHASE ALARMS ALARM CONTACT EDIT THE PASSWORD 1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-28.html>PAGE 28</a></h6><p>22X EXview LowLight Color Menu Tree SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* ENGLISH RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX DOME DRIVE MODEL XX-XXXX BACK BOX MEMORY AVAILABLE SOFTWARE VERSION XX.X BUILD FONT VERSION XX.X COMM XXXXXXXXXX D ADDRESS 1 P ADDRESS 2 CM95OO MODE OFF 32 PRESETS OFF PROTOCOL C PRESSURIZED* X.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-29.html>PAGE 29</a></h6><p>DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> LINE SYNC LINE SYNC LINE SYNC PHASE ALARMS RESUME SEQUENCE (SECS) RESET DELAY (SECS) <alarm settings> EDIT THE PASSWORD 1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-30.html>PAGE 30</a></h6><p>23X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* ENGLISH RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX DOME DRIVE MODEL XX-XXXX BACK BOX MEMORY AVAILABLE SOFTWARE VERSION XX.X BUILD FONT VERSION XX.X COMM XXXXXXXXXX D ADDRESS 1 P ADDRESS 2 CM95OO MODE OFF 32 PRESETS OFF PROTOCOL C PRESSURIZED* X.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-31.html>PAGE 31</a></h6><p>DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> LINE SYNC LINE SYNC LINE SYNC PHASE PRESETS ON 0 ALARMS RESUME SEQUENCE (SECS) RESET DELAY (SECS) <alarm settings> EDIT THE PASSWORD 1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZ.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-32.html>PAGE 32</a></h6><p>35X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* ENGLISH RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX DOME DRIVE MODEL XX-XXXX BACK BOX MEMORY AVAILABLE SOFTWARE VERSION XX.X BUILD FONT VERSION XX.X COMM XXXXXXXXXX D ADDRESS 1 P ADDRESS 2 CM95OO MODE OFF 32 PRESETS OFF PROTOCOL C PRESSURIZED* X.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-33.html>PAGE 33</a></h6><p>DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> LINE SYNC LINE SYNC LINE SYNC PHASE PRESETS ON 0 ALARMS RESUME SEQUENCE (SECS) RESET DELAY (SECS) <alarm settings> EDIT DETECTION AREAS PRESET NUMBER ***PRESET NOT DEFINED*** <edit preset label> <edit preset scene> <edit camera settings> <motion detection> <edit schedule> <clear preset> <clear camera settings> REFERENCE INFORMATION</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-34.html>PAGE 34</a></h6><p>Language SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czech. The factory default language is English. To change the display language: 1. Use the joystick to position the cursor beside LANGUAGE. 2. Press Iris Open.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-35.html>PAGE 35</a></h6><p>System Information SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* The System Information menu displays the dome drive model, software version, available memory, DIP switch information, and other diagnostic information. System settings cannot be changed using this menu; this information is for reference only. Use the following steps to display the System Information menu: RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM 1.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-36.html>PAGE 36</a></h6><p>Display Setup SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Display setup allows you to program how labels are displayed on the monitor. The following labels are available: PRESET LABEL: Identifies preset. ZONE LABEL: Identifies zone. ZOOM: Identifies the amount of magnification. AZIMUTH1/ELEVATION2: Amount of pan from zero degrees vertical and the amount of tilt from zero degrees horizontal.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-37.html>PAGE 37</a></h6><p>LABEL POSITIONS SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ALARM 1 ZOOM RATIO - XXX.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-38.html>PAGE 38</a></h6><p>Dome Settings CAMERA SPECTRA IV LANGUAGE TYPE OF LIGHTING (Does not apply to 16X or 18X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Pelco has calibrated settings that optimize the white balance and the picture for several lighting conditions. There are three settings: T1 (default): For use in outdoor applications. T2: For use in indoor applications. T3: (Available only with 23X models.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-39.html>PAGE 39</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The settings vary depending on camera model. 16X (Models DD4TC16 and DD4TC16-X) The default setting is 32X. Cameras with 128X zoom (16X optical zoom and 8X digital zoom) can be set for 16X, 32X, 64X, or 128X.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-40.html>PAGE 40</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT ZOOM SPEED Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 16X, 18X, 22X, 23X, or 35X optical zoom. Available zoom speed settings for 16X models include: HIGH: 1.9 seconds MEDIUM (default): 3.6 seconds LOW: 6.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-41.html>PAGE 41</a></h6><p>SPECTRA IV LANGUAGE IR CUT FILTER (Applies only to 18X, 23X, and 35X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The 18X, 23X, and 35X cameras have two modes of operation: color, and black-white. You can increase sensitivity in low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-42.html>PAGE 42</a></h6><p>ADVANCED CAMERA SETTINGS SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT SHUTTER SPEED Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value). AUTO (default): The electronic shutter speed is set automatically by the amount of light sensed by the camera.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-43.html>PAGE 43</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> BACK EXIT AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-44.html>PAGE 44</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> BACK EXIT AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-45.html>PAGE 45</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM BACKLIGHT COMPENSATION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-46.html>PAGE 46</a></h6><p>SPECTRA IV LANGUAGE SENSOR SCAN MODE (Applies only to 35X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Sensor scan mode controls the internal processing of the camera's image sensor. The data scanned from the image sensor at each field time is used for the internal image control algorithms and digital signal processing (DSP).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-47.html>PAGE 47</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> BACK EXIT ELECTRONIC IMAGE STABILIZATION (Applies only to 35X models.) Electronic image stabilization is a feature of the camera that can compensate for some forms of external influences.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-48.html>PAGE 48</a></h6><p>SPECTRA IV LANGUAGE IMAGE ENHANCEMENT (Applies only to 35X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The image enhancement feature improves the definition of objects, lines, or text in high contrast areas, making them appear sharper. There are two image enhancement settings: DEFAULT: Image enhancement is not activated. ENHANCED: Image enhancement is activated.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-49.html>PAGE 49</a></h6><p>SPECTRA IV LANGUAGE WIDE DYNAMIC RANGE (Applies only to 23X and 35X models.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-50.html>PAGE 50</a></h6><p>MOTION SETTINGS SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick control returns to normal operation.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-51.html>PAGE 51</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM PARK TIME This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a programmed time of inactivity. Park time can be programmed from 1–720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. Park Action EXIT This feature will define the activity when the dome parks.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-52.html>PAGE 52</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM PRESET FREEZE FRAME EXIT This feature freezes the scene on the monitor when going to a preset.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-53.html>PAGE 53</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. There are two types of limit stops: MANUAL: A manual (joystick) pan operation stops when a limit stop is reached. SCAN: The dome reverses direction during random, frame, or auto scanning when a limit stop is reached.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-54.html>PAGE 54</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT AZIMUTH ZERO Azimuth is the pan angle from zero to 359 degrees. Azimuth zero is the pan position you specify to be the zero degree point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: 1. Use the joystick to position the cursor beside SET AZIMUTH ZERO. 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-55.html>PAGE 55</a></h6><p>POWER UP SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE: No action. AUTO (default): The dome resumes its prior activity or direction before the power outage. AUTO SCAN: Dome starts auto scan operation.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-56.html>PAGE 56</a></h6><p>LINE SYNC SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. Spectra IV and Spectra IV SE dome systems automatically sense V-Sync input. No line sync setup is required for Pelco control systems that provide a V-Sync signal.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-57.html>PAGE 57</a></h6><p>PRESETS The model of the back box you are using limits the number of programmable presets that can be stored and retrieved in the back box memory. If you are using an older model back box, you may program and use up to the maximum number of presets available to the dome drive. However, if the dome drive is changed, the back box model will limit the number of stored presets available to the new dome drive. Refer to the table below for more information.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-58.html>PAGE 58</a></h6><p>Note: For American Dynamics controllers with only 32 presets, switch SW2-1 on the dome drive to the ON position. When SW2-1 is ON, preset 99 becomes 32 92 becomes 25 98 becomes 31 91 becomes 24 97 becomes 30 90 becomes 23 96 becomes 29 89 becomes 22 95 becomes 28 88 becomes 21 93 becomes 26 SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT If the limit stops are turned off, presets 23–26 can be used as regular presets.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-59.html>PAGE 59</a></h6><p>4. Edit preset camera settings: SPECTRA IV LANGUAGE a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS. <system information> <display setup> <dome settings> ACK ALERT* b. Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer to Camera on page 38 and Advanced Camera Settings on page 42 to change preset camera settings. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM c.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-60.html>PAGE 60</a></h6><p>SPECTRA IV LANGUAGE ENABLE MOTION DETECTION (Applies only to 23X and 35X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM The following are the settings for motion detection: OFF (default): Motion detection is turned off (disabled). ON: Motion detection is turned on (enabled). Note: Motion detection does not work if the shutter speed is set at less than 1/60 of a second.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-61.html>PAGE 61</a></h6><p>EDIT DETECTION AREAS DETECTION AREA 1 LOCATION SENSITIVITY DETECTION AREA 2 LOCATION SENSITIVITY DETECTION AREA 3 LOCATION SENSITIVITY DETECTION AREA 4 LOCATION SENSITIVITY BACK EXIT 0 MEDIUM 0 MEDIUM 0 MEDIUM 0 MEDIUM MOTION DETECTION AREAS Note: Motion detection is not guaranteed to catch 100 percent of activity.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-62.html>PAGE 62</a></h6><p>SPECTRA IV LANGUAGE ACTIVATE AUX COMMAND (Applies only to 23X and 35X models.) <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT Motion detection can be programmed to trigger an auxiliary command when motion is detected. The following are the settings for ACTIVATE AUX: OFF (default): Motion detection will not trigger an AUX command. 1: Triggers a command to AUX 1. 2: Triggers a command to AUX 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-63.html>PAGE 63</a></h6><p>PATTERNS SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park, event, or power-up). Both 16X and 18X models have one user-defined pattern available. The 22X, 23X, and 35X models can handle up to eight patterns.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-64.html>PAGE 64</a></h6><p>ZONES SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra IV and Spectra IV SE dome systems are capable of eight zones, each with a 20-character label. To program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open, and the cursor moves to the right. 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-65.html>PAGE 65</a></h6><p>WINDOW BLANKING SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> BACK EXIT WINDOW BLANKING STYLE Window blanking allows a user to program four-sided areas that cannot be viewed by the operator of the dome system.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-66.html>PAGE 66</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT 6. The blanked area can be programmed to turn on or off at a specified zoom point. To set the zoom point: a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press Iris Open. b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to set the zoom point.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-67.html>PAGE 67</a></h6><p>BLANK ALL ABOVE/BLANK ALL BELOW The Blank All Above and Blank All Below options add additional flexibility to setting up privacy areas. These settings are ideal for applications where a complete pan location needs to be blanked. Table C.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-68.html>PAGE 68</a></h6><p>ALARMS SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM The Spectra IV SE dome systems have seven alarm inputs that can be programmed as high, medium, or low priority. When an alarm is received, an input signal to the dome triggers the userdefined action (go to preset, run pattern, etc.) programmed for the alarm. Note: Refer to the notation in step 6 for the limited alarm features available for 16X and 18X models.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-69.html>PAGE 69</a></h6><p>SPECTRA IV 3. Select the alarm priority: LANGUAGE a. Use the joystick to position the cursor beside ALARM PRIORITY. <system information> <display setup> <dome settings> ACK ALERT* b. Press Iris Open. The cursor moves to the right. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT c. Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-70.html>PAGE 70</a></h6><p>SPECTRA IV 5. Set the auxiliary to activate: LANGUAGE a. Use the joystick to position the cursor beside ACTIVATE AUX. <system information> <display setup> <dome settings> ACK ALERT* b. Press Iris Open. The cursor moves to the right. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT c. Move the joystick up or down to view the following available selections. NO (default): Not activated. 1: An alarm action will close AUX 1. 2: An alarm action will close AUX 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-71.html>PAGE 71</a></h6><p>AUX Note: If a 16X or 18X model dome drive is installed in a Spectra III SE or Spectra IV SE back box, the auxiliary feature is functional and available. If a 16X or 18X model is installed in a standard Spectra III or Spectra IV back box, the auxiliary feature is not available. SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-72.html>PAGE 72</a></h6><p>TITLE TEXT SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Title text is the label used to identify the camera viewed on the monitor. Up to 20 characters can be used for a title. To edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT. 2. Press Iris Open. The following appears on the monitor: EXIT EDIT TITLE TEXT 1234567890 ABCDEFGHIJ KLMNOPQRST UVWXY.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-73.html>PAGE 73</a></h6><p>ALERT SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Note: The Alert option applies only to Pressurized Spectra IV dome systems. Spectra IV systems that are not pressurized will not display this menu item. Sensors strategically placed inside the pressurized dome system continually monitor pressure, temperature, and dew point.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-74.html>PAGE 74</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert> <clear> <password> <clock> <event> BACK EXIT ALERT REPEAT ACK ACTION ACTIVATE AUX <current reading> RESET ALERT ACK ACTION Set ACK ACTION to program the frequency at which an alert message is displayed after the alert condition has been</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-75.html>PAGE 75</a></h6><p>CLEAR SPECTRA IV Use this setting to clear user-defined settings or return the dome to factory default settings. The following are the available settings: LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT ALL ZONES: Clears all zones. To clear a single zone, refer to Zones on page 64. ALL PRESETS: Clears all presets. To clear a single preset, refer to Presets on page 57. ALL PATTERNS: Clears all patterns.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-76.html>PAGE 76</a></h6><p>PASSWORD Spectra IV and Spectra IV SE feature password protection to prevent unauthorized changes to the dome settings. An operator can open the System Information and Display Setup menus, but cannot access any of the dome settings menus. SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set a preset, pattern, or zone, the Enter Password menu appears on the monitor.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-77.html>PAGE 77</a></h6><p>CLOCK SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The clock is used to program the current date and time. The date and time set in the Clock menu is used to program events. The date and time can also be displayed on the monitor when the menus are not being accessed. To program the clock, do the following: 1. Use the joystick to position the cursor beside TIME BASE. Press Iris Open.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-78.html>PAGE 78</a></h6><p>7. If FIXED DATE was selected, the following appears on the monitor: CLOCK TIME BASE TIME FORMAT SET TIME INTERNAL CLOCK 12 HOUR 00:00 AM DATE FORMAT SET DATE MM/DD/YYYY 00/00/0000 DAYLIGHT SAVINGS TIME SHIFT START DATE MONTH DAY START TIME END DATE MONTH DAY END TIME FIXED DATE 1 HOUR APRIL 1 02:00 AM OCTOBER 1 02:00 AM BACK EXIT a. Use the joystick to position the cursor beside TIME SHIFT. Press Iris Open. Scroll through the options until the desired selection appears.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-79.html>PAGE 79</a></h6><p>8. If RELATIVE DATE was selected, the following appears on the monitor: CLOCK TIME BASE TIME FORMAT SET TIME INTERNAL CLOCK 12 HOUR 00:00 AM DATE FORMAT SET DATE MM/DD/YYYY 00/00/0000 DAYLIGHT SAVINGS RELATIVE DATE TIME SHIFT 1 HOUR START DATE MONTH APRIL WEEK 1ST DAY SUNDAY START TIME 02:00 AM END DATE MONTH WEEK DAY END TIME OCTOBER LAST SUNDAY 02:00 AM BACK EXIT Follow the instructions in step 7 for FIXED DATE, adding WEEK.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-80.html>PAGE 80</a></h6><p>EVENT SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT An event is a preprogrammed camera, park, scan, preset, pattern, window blanking, alarm, or auxiliary function that can be performed automatically at a specific date and time. For example, suppose a camera is set to run in a continuous pattern that scans a parking lot during business hours Monday through Friday.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-81.html>PAGE 81</a></h6><p>SPECTRA IV LANGUAGE <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS <camera> <motion> <power up> <line sync> <presets> <patterns> <zones> <window blanking> <alarms> <aux> <title text> <alert>* <clear> <password> <clock> <event> BACK EXIT EVENT EVENT TYPE EVENT LABEL <edit event label> <edit event> <clear event> <list event> HOLIDAY <edit holiday> <clear holiday> <list holidays> EVENT TYPE Any of the available event types ca</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-82.html>PAGE 82</a></h6><p>SPECTRA IV LANGUAGE EVENT LABEL Set the event label to NEW to create a new event. <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM Use the following steps to manage an existing event. 1. Use the joystick to position the cursor beside EVENT LABEL. Press Iris Open. 2. Move the joystick up or down to scroll through the events. Press Iris Open to enter selection.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-83.html>PAGE 83</a></h6><p>SPECTRA IV LANGUAGE EDIT EVENT Use the following steps to edit an event.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-84.html>PAGE 84</a></h6><p>SPECTRA IV LANGUAGE CLEAR EVENT To clear an event: <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM 1. Use the joystick to position the cursor beside CLEAR EVENT. 2. Press Iris Open. 3. Follow the directions displayed on the monitor.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-85.html>PAGE 85</a></h6><p>SPECTRA IV LANGUAGE EDIT HOLIDAY Use the following steps to edit a holiday: <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT 1. Use the joystick to position the cursor beside EDIT EVENT LABEL. 2. Press Iris Open. 3. Use the joystick to position the cursor beside OCCURRENCE. Press Iris Open. The following are the settings for Occurrence: FIXED DATE: The holiday occurs on the same date each year.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-86.html>PAGE 86</a></h6><p>SPECTRA IV LANGUAGE CLEAR HOLIDAY To clear a holiday: <system information> <display setup> <dome settings> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM 1. Use the joystick to position the cursor beside CLEAR HOLIDAY. 2. Press Iris Open. 3. Follow the directions displayed on the monitor.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-87.html>PAGE 87</a></h6><p>SCHEDULED EVENTS Use this page to record scheduled events. EVENT NUMBER EVENT TYPE LABEL TIME OCCURS HOLIDAY Example: 1 Preset Weekend 11:00 AM Sat–Sun Skips Holidays Description: Camera focuses on gate on weekends when the office is closed.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-88.html>PAGE 88</a></h6><p>Reset, Cycle Power, Reboot RESET CAMERA SPECTRA IV LANGUAGE ENGLISH Use this function to reset all camera settings to factory default parameters. <system information> <display setup> <dome settings> ACK ALERT* CYCLE CAMERA POWER RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM If the camera is not operating or if you lose camera control, cycle camera power. Cycling camera power resets the camera but does not change any saved camera settings.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-89.html>PAGE 89</a></h6><p>Software/Language File Upload The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-90.html>PAGE 90</a></h6><p>Suggested Preventative Maintenance The Spectra IV and Spectra IV SE dome systems do not require any special maintenance. Occasionally, dust may build up on the inside or the outside of the dome. If this occurs, turn power off to the unit and remove the lower dome from the back box. Remove the dust from the lower dome using compressed air from a spray can. Replace the lower dome following the installation instructions that were shipped with it.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-91.html>PAGE 91</a></h6><p>Specifications 16X MODELS DD4TC16 Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise NTSC 2:1 Interlace 1/4-inch interline transfer CCD 768 (H) X 494 (V) >470 TV lines f/1.4 (focal length, 4~64 mm; 16X optical zoom, 8X digital zoom) 1.9/3.6/6.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-92.html>PAGE 92</a></h6><p>18X MODELS DD4CBW18 Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise NTSC 2:1 Interlace 1/4-inch progressive scan CCD 768 (H) X 494 (V) 540 TV lines f/1.6 (focal length, 3.8~68.4 mm; 18X optical zoom, 12X digital zoom) 2.9/4.2/5.8 seconds 51° at 3.8 mm wide zoom; 3° at 68.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-93.html>PAGE 93</a></h6><p>22X MODELS DD4C22 Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise NTSC 2:1 Interlace 1/4-inch CCD 768 (H) X 494 (V) >470 TV lines f/1.6 (focal length, 4~88 mm; 22X optical zoom, 12X digital zoom) 2.4/3.9/6.3 seconds 47° at 4 mm wide zoom; 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-94.html>PAGE 94</a></h6><p>23X MODELS DD4CBW23 Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise Wide Dynamic Range 94 NTSC 2:1 Interlace 1/4-inch progressive scan CCD 768 (H) X 494 (V) 540 TV lines f/1.6 (focal length, 3.6~82.8 mm; 23X optical zoom, 12X digital zoom) 2.9/4.2/5.8 seconds 54° at 3.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-95.html>PAGE 95</a></h6><p>DD4CBW23-X Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise Wide Dynamic Range C3412M-D (12/08) PAL 2:1 Interlace 1/4-inch progressive scan CCD 752 (H) X 582 (V) 540 TV lines f/1.6 (focal length, 3.6~82.8 mm; 23X optical zoom, 12X digital zoom) 2.9/4.2/5.8 seconds 54° at 3.6 mm wide zoom; 2.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-96.html>PAGE 96</a></h6><p>35X MODELS DD4CBW35 Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed (optical range) Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise Wide Dynamic Range 96 NTSC 2:1 Interlace/1:1 Progressive (user-selectable) 1/4-inch CCD 768 (H) X 494 (V) >540 TV lines f/1.4 (focal length, 3.4~119 mm; 35X optical zoom, 12X digital zoom) 3.2/4.6/6.6 seconds 55.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-97.html>PAGE 97</a></h6><p>DD4CBW35-X Signal Format Scanning System Image Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal-to-Noise Wide Dynamic Range PAL 2:1 Interlace/1:1 Progressive (user-selectable) 1/4-inch CCD 752 (H) X 582 (V) >540 TV lines f/1.4 (focal length, 3.4~119 mm; 35X optical zoom, 12X digital zoom) 3.2/4.6/6.6 seconds 55.8° at 3.4 mm wide zoom; 1.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-98.html>PAGE 98</a></h6><p></p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-99.html>PAGE 99</a></h6><p>PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/pelco/spectra-c3412m-d/security-camera-user-manual/page-100.html>PAGE 100</a></h6><p>www.pelco.com Pelco, Inc.</p></li></ul></nav></div></section></section></main><footer class=page-footer><div class="container flex-column py-3 py-sm-4"><div class="row mb-1 mb-sm-2 mb-md-5"><a href=/ class="brand offset-sm-0 col-sm-4 col-md-3 col-lg-2 offset-2 col-8 text-center text-md-start"><img class=logo-small src=/assets/img/brand-large.png alt=Manualshelf></a></div><div class=row><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Who We Are</dt><dd><a class=text-decoration-none href=/about>About Us</a></dd><dd><a class=text-decoration-none href=/company>Company</a></dd><dd><a class=text-decoration-none href=/careers>Careers</a></dd><dd><a class=text-decoration-none href=/terms>Terms & Privacy</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Resources</dt><dd><a class=text-decoration-none href=/brands>List of Manufacturers</a></dd><dd><a href=/ class=text-decoration-none>Support</a></dd><dd><a class=text-decoration-none href=/press>For the Press</a></dd><dd><a class=text-decoration-none href=/press#assets>Media assets</a></dd><dd><a class=text-decoration-none href=/faq>FAQ</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Get in touch</dt><dd><a class=text-decoration-none href=#>Blog</a></dd><dd><a class=text-decoration-none href=#>Email</a></dd><dd><a class=text-decoration-none href=/dmca>DMCA</a></dd></dl></div><div class=row><div class="text-center text-sm-start col-sm-4 pe-sm-0"><a href=https://www.facebook.com/pages/ManualShelf/1488826334681423 class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-facebook-f"></i></a><a href=https://www.twitter.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-twitter"></i></a><a href=https://plus.google.com/+ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-google-plus-g"></i></a><a href=http://www.pinterest.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none"><i class="fab fa-pinterest-p"></i></a></div><div class="col col-sm-8 d-flex flex-column align-items-center flex-sm-row flex-wrap flex-sm-nowrap justify-content-center justify-content-sm-end"><div class="copy w-auto d-flex align-items-center justify-content-center justify-content-sm-end mt-2 mt-sm-0 me-2">ManualShelf © 2013-2025</div><select class="form-select form-select-sm w-auto mt-2 mt-sm-0"><option value=usa>USA</option></select><div></div></div><div id=pixel><script>
googletag.cmd.push(function() { googletag.display('pixel'); });
</script></div></footer><script src=/assets/js/jquery-3.3.1.min.js></script><script src=/assets/js/bootstrap.bundle.min.js></script><script src=/assets/js/jquery.autocomplete.min.js></script><script type=text/javascript>
$.extend({
redirectPost: function(location, args) {
var form = '';
$.each(args, function(key, value) {
form += '<input type="hidden" name="' + key + '" value="' + value + '">';
});
form = '<form id="s1" action="' + location + '" method="POST">' + form + '</form>';
$(document.body).append(form);
$("#s1").submit();
}
});
$(document).ready(function(){
$("#query").autocomplete({
minChars: 3,
groupBy: 'type',
paramName: 'q',
dataType: 'json',
serviceUrl: '/autocomplete',
noCache: true,
showNoSuggestionNotice: true,
noSuggestionNotice: 'Zarro results found',
onSelect: function (suggestion) {
$.redirectPost(suggestion.data.url, {highlight: encodeURIComponent(JSON.stringify(suggestion.data.hls))});
}
});
var toc = $('.toc-selector');
if (toc.length) {
var slideParams = { duration: 800, easing: 'linear' };
toc.click(function() {
$(this).toggleClass('open');
var section = $('.toc-content');
var isCollapsed = section.attr('data-collapsed') === 'true';
if (isCollapsed) {
section.slideDown(slideParams)
section.attr('data-collapsed', 'false')
} else {
section.slideUp(slideParams);
section.attr('data-collapsed', 'true')
}
});
}
});
var lastSmall = $(window).width() < 576;
$(window).resize(function() {
var newSmall = $(window).width() < 576;
if (lastSmall != newSmall) {
lastSmall = newSmall;
window.location.href = window.location.href;
}
});
</script></body></html>
