Manualshelf

Security Camera User Manual

ManualsBrandsPelco ManualsSecurity CameraSPECTRA C3463M-B
31323334353637383940
C3463M-B (2/11) 31
To set manual or scan stops:
1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
NOTE: In order for the manual or scan stops to work, the LIMIT STOPS option must be ON.
To clear manual or scan stops:
1. Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
AZIMUTH ZERO
Azimuth is the pan angle from zero to 359 degrees. Azimuth zero is the pan position you specify to be the zero degree point. Azimuth zero is
normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.
To configure azimuth zero:
1. Use the joystick to position the cursor beside SET AZIMUTH ZERO.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
To clear azimuth zero:
1. Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
AUTO TRACKING
(Applies to 27X and 35X models only.)
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
AUTO TRACKING
DISPLAY SETUP
SENSITIVITY
START TIME
ZOOM
LOST ACTION
RETURN
OFF
ON
HIGH
60
ON
STOP
OFF
AUTO TRACKING
<CAMERA>
<MOTION>
<AUTO TRACKING>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
BACK
EXIT
DOME SETTINGS
AUTO TRACKING
Auto tracking allows the camera to automatically pan, tilt, and zoom to track objects of interest (people, cars, and so forth) when motion is
detected in a scene without requiring an operator to manually control the camera’s PTZ movements. There are two settings:
ON: Au
to tracking is enabled.
OFF (default): Auto tracki
ng is disabled.
NOTE:
If the auto tracking setting is OFF, all other settings in the Auto Tracking menu are disabled.