User Manual
Table Of Contents
- 1. Important Notices
- 2. Overview
- 3. Safety
- 4. Installation
- 4.1 Unpacking
- 4.2 Camera Installation
- 4.2.1 Installation Guidelines and Preparation
- 4.2.1.1 Cable wires between camera and DC/PoE power supply should be 20-22AWG.
- 4.2.1.2 Both the camera ant the end-equipment connected to it should be permanently connected to protective earth, using screw and washers. Wires should be made of cupper. Minimal grounding cable is 14AWG.
- 4.2.1.3 In case of using DC power supply:
- 4.2.1.4 Power supply (either POE injector or DC power supply) should be safety approved for local regulations.
- 4.2.1.5 Install the Ferrite on the operational cable as close as possible , max 5cm, from the system.
- 4.2.2 Mechanical Interface Preparation
- 4.2.3 Wall Mount Configuration
- 4.2.4 Pole Mount Configuration
- 4.2.5 Electrical ICD IP PoE Cable
- 4.2.1 Installation Guidelines and Preparation
- 5. Operation
- 5.1 First Time Credentials Setup
- 5.2 Logging Into Sarix TI Camera Web GUI
- 5.3 Changing Your Password
- 5.4 Main Window Overview
- 5.5 Live View Window
- 5.6 Status Window
- 5.7 Network Window
- 5.8 Streaming Window
- 5.9 Image Processing Window
- 5.10 Analytics Window
- 5.11 System Window
- 5.12 Logging Out from the Web GUI
- 6. Maintenance
- 7. Ordering Information
- 8. Index
Sarix TI Series Camera User Manual Chapter 1: Important Notices
Table of Contents
1. Important Notices ............................................................................................................................. 1-8
1.1 Regulatory Notices [FCC Class A] ..................................................................................................... 1-8
1.1.1 Radio and Television Interference ............................................................................................. 1-8
1.2 Legal Notice [Audio Notice] ............................................................................................................... 1-8
1.3 Video Quality Caution ........................................................................................................................ 1-9
1.3.1 Frame Rate Notice Regarding User Selected Options ............................................................... 1-9
1.4 Open Source Software ........................................................................................................................ 1-9
1.5 CCC Power Cord Statement ............................................................................................................... 1-9
1.5.1 2.4 GHZ Radio Device ............................................................................................................ 1-10
1.6 ESD Warning .................................................................................................................................... 1-10
1.7 Warranty ............................................................................................................................................ 1-10
1.8 Network Topology Statement ........................................................................................................... 1-10
2. Overview .......................................................................................................................................... 2-13
2.1 Overview ........................................................................................................................................... 2-14
2.2 Features ............................................................................................................................................. 2-14
2.3 Physical Description of the Camera .................................................................................................. 2-15
2.4 Marking ............................................................................................................................................. 2-16
2.5 Sarix TI Web GUI ............................................................................................................................. 2-17
2.6 Technical Data and Specifications .................................................................................................... 2-18
2.6.1 System Specifications .............................................................................................................. 2-18
2.6.2 Configurations ......................................................................................................................... 2-19
2.6.3 Thermal Camera ...................................................................................................................... 2-20
2.6.4 CMOS Camera ........................................................................................................................ 2-20
3. Safety .................................................................................................................................................. 3-1
3.1 Safety Conventions ............................................................................................................................. 3-1
3.2 Safety During Installation ................................................................................................................... 3-2
3.3 Safety During Maintenance ................................................................................................................ 3-2
4. Installation ......................................................................................................................................... 4-1
4.1 Unpacking ........................................................................................................................................... 4-1
4.2 Camera Installation ............................................................................................................................. 4-2
4.2.1 Installation Guidelines and Preparation .................................................................................... 4-2
4.2.2 Mechanical Interface Preparation .............................................................................................. 4-3
4.2.3 Wall Mount Configuration ........................................................................................................ 4-4
4.2.4 Pole Mount Configuration ......................................................................................................... 4-5
4.2.5 Electrical ICD IP PoE Cable ..................................................................................................... 4-6
5. Operation ........................................................................................................................................... 5-1
5.1 First Time Credentials Setup ............................................................................................................... 5-2