User Manual
Table Of Contents
- 1. Important Notices
- 2. Overview
- 3. Safety
- 4. Installation
- 4.1 Unpacking
- 4.2 Camera Installation
- 4.2.1 Installation Guidelines and Preparation
- 4.2.1.1 Cable wires between camera and DC/PoE power supply should be 20-22AWG.
- 4.2.1.2 Both the camera ant the end-equipment connected to it should be permanently connected to protective earth, using screw and washers. Wires should be made of cupper. Minimal grounding cable is 14AWG.
- 4.2.1.3 In case of using DC power supply:
- 4.2.1.4 Power supply (either POE injector or DC power supply) should be safety approved for local regulations.
- 4.2.1.5 Install the Ferrite on the operational cable as close as possible , max 5cm, from the system.
- 4.2.2 Mechanical Interface Preparation
- 4.2.3 Wall Mount Configuration
- 4.2.4 Pole Mount Configuration
- 4.2.5 Electrical ICD IP PoE Cable
- 4.2.1 Installation Guidelines and Preparation
- 5. Operation
- 5.1 First Time Credentials Setup
- 5.2 Logging Into Sarix TI Camera Web GUI
- 5.3 Changing Your Password
- 5.4 Main Window Overview
- 5.5 Live View Window
- 5.6 Status Window
- 5.7 Network Window
- 5.8 Streaming Window
- 5.9 Image Processing Window
- 5.10 Analytics Window
- 5.11 System Window
- 5.12 Logging Out from the Web GUI
- 6. Maintenance
- 7. Ordering Information
- 8. Index
Chapter 1: Important Notices Sarix TI Series Camera User Manual
1-7
List of Tables
Table 2-1: Technical Data and Specifications - System Specifications ............................................... 2-18
Table 2-2: Technical Data and Specifications - Configurations .......................................................... 2-19
Table 2-3: Technical Data and Specifications - Thermal Camera ....................................................... 2-20
Table 2-4: Technical Data and Specifications - CMOS Camera ......................................................... 2-20
Table 4-1: Electrical ICD IP PoE Cable - Pinout ................................................................................... 4-6
Table 7-1: Ordering Information for 30Hz Camera ............................................................................. 7-64
Table 7-2: Ordering Information for 9Hz Camera ............................................................................... 7-64
Table 7-3: Ordering Accessories .......................................................................................................... 7-64