Spec Sheet

PRODUCT SPECIFICATION
video management solutions
C4032 / REVISED 12-20-17
International Standards
Organization Registered Firm;
ISO 9001 Quality System
VideoXpert
™
Storage
450 MBPS RECORDING THROUGHPUT, UP TO 96 TB RAW CAPACITY, RAID 6
Product Features
• Recording throughput up to 450 Mbps (300 Streams) meets
demanding performance requirements for write-intensive
applications
• Hardware designed to eliminate single points of failure, including
RAID 6 Storage for optimum reliability
• Includes support for 3rd party cameras without a translation
interface
• ONVIF compliant: Supports ONVIF S compliant cameras and devices
• Multicast recording support allows for recording of multicast data
streams for restricted bandwidth scenarios
• Failover and redundant recording maximizes system uptime for
mission-critical applications
• Serves up to 32 simultaneous playback streams independently of
recording throughput
• Includes support for audio recording and playback for Pelco cameras
• Includes VideoXpert Storage software with 3-year upgrade plan and
full platform support
• Performance Levels Maintained during RAID Error Conditions
VideoXpert
™
Storage (VXS) is a RAID 6, high-availability recording
platform that captures, stores, and serves recorded video for your
VideoXpert system. As a high-density platform, VideoXpert Storage
has double the capacity of any recorder previously available to
VideoXpert.
The VideoXpert Storage hardware platform is designed to maximize
uptime and ensure that you never lose access to your mission-critical
video data. Its RAID 6 storage configuration provides double parity
protection of recorded data; the hard drive bay is cooled through the
use of high capacity, redundant fans to ensure that the drives are
kept at an optimum operating temperature; and its fully redundant
power supplies guard against power supply failures.
The platform’s operating system is contained on an SSD, freeing
more space for video and ensuring high reliability as well as
maximizing performance and throughput. Hard drives belonging to
the RAID array are front-loading and hot-swappable, making it easy
to remove and replace failed drives. VideoXpert Storage servers also
maintain performance levels in both normal and RAID error
conditions, preventing dips in performance and ensuring that users
can always obtain the video they need through VideoXpert.
VideoXpert Storage hardware includes the Storage software,
complete with a 3-year upgrade plan and Pelco support. The
hardware platform does not require per-channel licensing; there are
no recurring costs associated with recording cameras.
The Storage platform maximizes support for recording groups within
VideoXpert. It allows you to configure pre- and post-event recording
periods within VideoXpert, so that you capture the appropriate
amount of video for any event. You can also configure “bump-on-
alarm” recording schedules. You can set VideoXpert Storage to
operate using unicast or multicast streams, making Storage easily
adaptable to your surveillance network. VideoXpert Storage also
supports failover and redundant recording schemes, ensuring your
video remains available even if a single Storage server in the cluster
fails.
The VideoXpert Storage platform natively supports third-party IP
cameras as well as Optera cameras, so you can bring your 3rd party
cameras into VideoXpert without expensive translation interfaces.
Using VideoXpert Storage, your third-party cameras appear and
operate within VideoXpert just as native Pelco cameras.
13.2 CM
(5.2 IN)
43.7 CM
(17.2 IN)
64.8 CM
(25.5 IN)