User manual

10 Pelco Manual C651M (7/99)
• Automatic Head Cleaning—The VCR automatically removes foreign matter
from the heads when a cassette is inserted for continuous smooth operation.
• Easy Setup Using A Monitor—The on-screen menus simplify setup program-
ming. You can select these menus even without inputting a video signal.
• Easy Cueing With Alarm Recording—Index signals are automatically added
at the beginning of alarm recording for easy cueing. You can confirm alarm
starting time in the playback video on the monitor or in the alarm list on the
Maintenance menu.
• Time And Date Search System—You can search for a specific hour/minute
and date to accurately locate an image on tape.
• External Time Clock Adjustment—You can reset the on-screen clock to the
nearest hour by applying a signal to the RST (reset) IN terminal at the rear of
the VCR.
• Record Check—You can confirm correct recording by pressing the PLAY but-
ton during recording.
• Special Playback Features—These include still images, speed search, re-
verse playback, frame-by-frame viewing in both directions, slow-motion, and
high-speed viewing.
• JOG Dial/SHUTTLE Ring—You can use these controls to search for the de-
sired image. You can adjust the playback speed with the SHUTTLE ring and
search for an image frame-by-frame with the JOG dial.
• Recording Options—This versatile system offers a variety of recording op-
tions, including daily and weekly timer recording, repeat, and alarm recording.
• Protection Against Power Failures—Recording data (including date, time,
and timer setup) is stored in backup memory, so the system can resume re-
cording after a power failure. The monitor displays the time of the failure.
• Digital <ELAPSED TIME> Display—The elapsed time of recording and play-
back is stored in non-volatile memory. You can use the elapsed time display
as a guide to when to do periodic maintenance.
• Tape Use Counter—This counter displays how many times you have recorded
on a tape. This helps you decide when you need to replace a tape.
• Daylight Saving Time Setting—A daylight saving time setting is available.
You can set the clock forward an hour by programming the menu.
NOTE: The battery backup is for
memory only—the VCR does not
continue recording if the power
goes out. If you want to keep re-
cording during an outage, make
sure the VCR system is on your
UPS (uninterruptible power supply)
system.