Operation Manual

25
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with a
damp cloth.
We recommend every 3 months to run a 65°C wash
programme without dishes using detergent.
Cleaning the filters
The filters in the base of the washing compartment are
to large extent self-cleaning. Nevertheless the filters
should be checked and cleaned from time to time.
Dirty filters will degrade the washing result.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a
coarse/fine filter, microfilter and a flat filter. Unlock
the filter system using a handle on the microfilter,
and remove.
3. Turn the handle about
1
/
4
a turn anticlockwise and
remove.
4. Take hold of the coarse/fine filter (1/2) by the
handle with the hole and remove from the
microfilter (3).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (4) from the base of the
washing compartment and clean both faces
thoroughly.
7. Put the flat filter back in the base of the washing
compartment.
8. Place the coarse/fine filter in the microfilter and
press together.
9. Put the filter combination in place and lock by
turning the handle clockwise to the stop. During
this process ensure that the flat filter does not
protrude above the base of the washing
compartment.
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
Maintenance and cleaning
MA15
MA17
MA16
4