User manual

• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The time of the washing programme
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the
acoustic signals.
Delay button
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
Programme buttons
Press one of these buttons to set a wash-
ing programme. The related indicator
comes on. Refer to 'Washing programmes'.
Function buttons
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Activate and deactivate the multitab func-
tion. Refer to 'Multitab function'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
• Cancel a washing programme in opera-
tion. Refer to 'Setting and starting a
washing programme'.
• Activate and deactivate the acoustic sig-
nals. Refer to 'Acoustic signals'.
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the multitab
function.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
• To deactivate or activate the acoustic
signals.
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators come on.
Activate the appliance. The appliance
is not in setting mode when:
• Only one programme indicator comes
on.
• The display shows the time of the wash-
ing programme or of the delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Setting
and starting a washing programme'.
Acoustic signals
You can hear the acoustic signals in these
conditions:
• The washing programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Activate the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function button (B) and
function button (C) at the same time un-
til the indicators of function buttons (A),
(B) and (C) flash.
4. Release function button (B) and function
button (C).
5. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the setting of the
acoustic signals.
The acoustic signals
are on.
The acoustic signals
are off.
6. Press function button (C) to change the
setting
7. Deactivate the appliance to confirm.
To activate the acoustic signals again,
do steps (1) through (7).
24