Operation Manual

EN 32
FAULTS
Problem with the hob Possible cause Solution
The burner won’t burn evenly. Burner parts not correctly
installed.
Assemble the burner parts
using the centring ridges.
Burner components dirty/
damp.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Wrong type of gas used. Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
The burner goes out after
igniting.
Control knob not pressed in
long enough.
Keep the control knob
pressed in for at least
10 seconds.
Problem with the oven Possible cause Solution
The oven won’t heat up. No temperature set. Set the temperature using
the temperature knob.