Operation Manual
24
409776
Program: Max. load Type of laundry Possible combinations
Perfect Black
2,5 kg/
2,5 kg/
2,5 kg
2 kg"
Dark laundry using special-purpose
detergents for black laundry, with
gentle tumbling and lower spinning
rates
• spinning
• pump stop (RH)
• normal
Ultra White
2,5 kg/
2,5 kg/
2,5 kg
2 kg"
Delicate, slightly soiled laundry
like bras, lace underwear, using
special-purpose detergents for white
delicate laundry... for washing at low
temperatures with gentle tumbling
and lower spinning rate.
• spinning
• pump stop (RH)
• normal
Partial programs these are independent programs. Use them when you feel you do not need the
entire washing program. Before selecting a new program, the washing machine
has to be switched to "OFF" position for 1 second). Decrease spinning speed by
pressing the (4) key.
Rinse rinsing of the laundry (including hand washed laundry) without spinning
between the rinsing cycles, with one final spinning cycle.
"Extra water" can be selected by pressing the (6b) key.
Softening
for softening, starching, or impregnating previously washed laundry. It can also
be used as a short rinse, but without adding any conditioner.
It is completed with an additional rinse.
"Extra water" can be selected by pressing the (6b) key.
Spinning/
pumping
for spinning the laundry.
If you wish to pump out the water from the machine, without spinning, then
press the (4) key several times to decrease the setting to "DRAIN".
"Data for SLIM
Favourite Wash 1
To store a program, that you have customized.
First, select the program (rotate the program selector dial to the
desired position) and adjust the settings as desired.
To save, press and hold the (7) and (6a) keys. The display will read
"STYLE" P1 (NORM P1 ... ECO P1 ...) and an acoustic signal will be
emitted.
The program will remain stored until you change it with the same
procedure.
Favourite Wash 2
To store a program, that you have customized.
First, select the program (rotate the program selector dial to the
desired position) and adjust the settings as desired.
To save, press and hold the (7) and (6b) keys. The display will read
"STYLE" P2 (NORM P2 ... ECO P2 ...) and an acoustic signal will be
emitted.
The program will remain stored until you change it with the same
procedure.