Installation Guide
9
#2 Nut Ø10
#3 Nut Ø12
#4 Lock Washer
#5 Flat Washer
#6 Flat Metal Bracket
#1 Adjustable Foot
INSTALLING ACRYLIC PLINTH
1. Ensure tub surface is protected during assembly, installation and the nal phase of
construction.
2. Place tub on oor, upside down, and place the acrylic plinth on tub by aligning holes with
tub bolts.
3. Secure the plinth by attaching washers (#4 & #5) and mounting nuts (#3) to the threaded
tub bolts in the order shown. Do not overtighten.
4. Turn the tub and plinth back over and set in desired location.
5. Use the adjustable feet (#1) to level the tub.
NOTE: Silicone caulk should be applied where the tub meets the plinth and also where the
plinth meets the oor.
Caulk Here
&
Here
See Note