Owner's Manual

1. Unpackage and account for all items before starting installation.

2. Determine location and water ow direction for system.

3. Install covers onto bracket orientating the INLET and OUTLET

correctly. Use 4 bolts and washers in each cover to attach.

Assembly

A. (12) Machine Bolts & Washers

B. (3) Lag Bolts & Washers

C. (1) Spanner Wrench

D. (3) 20” Housings w/Covers

E. (1) Sediment Cartridge

F. (1) Chloramine Cartridge

G. (1) NaturSoft Cartridge

H. (1) Mounting Bracket

I. (3) Decals

J. (1) Silicone Grease

Items Included:

MODEL: PSE-500

Specications:

Rated Service Flow 5 gpm

Minimum Working

Pressure

25 psi

Maximum Working

Pressure

80 psi

Operating

Temperatures

36°F - 120°F

PH Range 6 - 11

NaturSoft Cartridge

(Install as Shown)

Housing Cover

Housings

Stand Pipe

O-Ring

EZC_2017-2

_R-B

EZ CONNECT COMPACT WATER FILTRATION SYSTEM

eco

E F

H I

Fig. A

Drains

PAGE 1
EZ CONNECT COMPACT WATER FILTRATION SYSTEM eco MODEL: PSE-500 Fig. A NaturSoft Cartridge (Install as Shown) A B C D Housing Cover O-Ring E F G H I Stand Pipe J Items Included: A. (12) Machine Bolts & Washers B. (3) Lag Bolts & Washers C. (1) Spanner Wrench D. (3) 20” Housings w/Covers E. (1) Sediment Cartridge Housings Drains Assembly 1. Unpackage and account for all items before starting installation. 2. Determine location and water flow direction for system. F.
PAGE 2
Installation 1. Install bracket to wall using appropriate fasteners (3 qty, 5/16” x 2” stainless lag bolts included). 2. Once the bracket is mounted you can now attach your plumbing to the INLET and OUTLET with 1” male threaded adaptions (not included). (Plumbing a shut off valve prior and a bypass around the unit is recommended). 3. Apply corresponding decals to each of the covers as shown. (Sediment on Inlet side, Chloramine in middle, NaturSoft on Outlet side). 4.