Instructions / Assembly

© 2011 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
www.pelicanwater.com
[phone]
Figure 2
Note: If your tank has a removable riser tube, when removing the expired media from the tank the riser
tube inside the tank will be flushed out of the tank along with the expired media. If this occurs, pull the
tube all the way out and put it aside until the expired carbon media is fully removed from the tank. If the
riser tube does not come out during the above process, disregard this note and skip to step 5.
Figure 3
4. Once the expired media is removed, replace the riser tube inside the tank with the attached lower
basket on the bottom and the open tube facing up.
5. The riser tube will rest in the center of the bottom of the tank. Cover the top of the riser tube with
the provided blue cap then pour media replacement into the tank with the funnel provided.
6. Remove the blue cap from the end of the riser tube and fit the riser tube into the bottom of the
upper basket attached to the head.
7. Push down to screw the head back onto the tank hand-tight.
Upper Basket
Head
Riser Tube
Tank
Blue
Funnel
Blue Cap
Head
TankTank
Riser Tube Riser Tube