Instructions / Assembly

© 2011 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
www.pelicanwater.com
[phone]
Figure 4
8. Use the Hose Bib Assembly to connect your garden hose to the upflow inlet side of the tank head.
9. Fill the tank with water until the water starts to flow out the downflow inlet. Turn water off and let
soak for 48 hours.
10. After 48 hours, turn the garden hose on 1/4 turn and rinse the tank for 15-30 minutes or until the
water runs clear.
11. Turn off the water.
Figure 5
12. Use the Hose Bib Assembly to connect your garden hose to the downflow inlet side of the tank
head.
13. Run water through the downflow inlet side for 1 minute or until the water runs clear.
14. Turn off the water.
15. Remove the Hose Bib Assembly from the tank head and disconnect the garden hose.
UPFLOW
INLET
DOWNFLOW
INLET
Water
Whole House Water Filter
Garden
Hose
Hose Bib
Assembly
UPFLOW
INLET
DOWNFLOW
INLET
Water
Whole House Water Filter
Garden
Hose
Hose Bib
Assembly