Use and Care Manual
INSTALLATION WARRANTYMAINTENANCEOPERATION
OVERVIEW
WHAT MODEL DO I HAVE?
No-tools maintenance Yes Yes Yes
Safety cap & special lamp
plug
Yes Yes Yes
Lamp operation indicator Yes Yes Yes
Power supply operation
indicator
Yes Yes Yes
Reference card Yes Yes Yes
Lamp timer display -- Yes Yes
Lamp timer reset button -- Yes Yes
Mute button -- Yes Yes
Solenoid valve -- Optional Optional
External control relay -- Optional Optional
PUV-Basic PUV-8 PUV-16
To find out what model you have, look at the label on the side of the power supply.
Model PUV-Basic, Class B certified
Model PUV-8 and PUV-16
4.50
3.12
.06
.12
1.250
1.750
3.250 1.250
3.00
NOTE: LABEL SETS OFF ROLL
ON LEFT SIDE, AS SHOWN
VIQUA -
a Trojan Technologies Company
120-240 VAC, 50-60Hz, 1A
SERIAL #: 000001
PART #: "B"
REPLACEMENT LAMP: "C"
LAMPE DE RECHANGE: "C"
DATE OF MANUFACTURE:
MODEL:
"A"
DATE OF MANUFACTURE:
SERIAL #: 000001
PART #: "B"
UV STERILIZER
98HA
MODEL
:
"A"
REPLACEMENT LAMP: "C"
LAMPE DE RECHANGE: "C"
7 24084 XXXXX Y
MODEL
:
"A"
NOTE:
LABEL TO BE PRINTED ON 602919 LABEL STOCK.
1.
SEE SHEET 2 DESIGN TABLE FOR "A", "B", "C" AND "SYSTEM DESCRIPTION".
2.
SERIAL NUMBER "000001" IS AN EXAMPLE OF THE FIRST SERIAL NUMBER OF THIS TYPE OF SYSTEM. THE
3.
NUMBER WILL INCREASE FOR EACH ADDITIONAL SYSTEM PRODUCED. LABEL VISION WILL
AUTOMATICALLY INCREASE THIS NUMBER BY 1 FOR EACH LABEL PRINTED.
INFORMATION IS PRINTED ON THE LABEL BY A THERMAL TRANSFER PROCESS USING A ZEBRA THERMAL
4.
TRANSFER PRINTER AND LABEL VISION SOFTWARE. EXACT LOCATION OF TEXT AND IMAGES IS NOT
DEFINED. APPROXIMATE POSITIONING AS PER THE BELOW IMAGE IS ACCEPTABLE. EXACT FONT TYPES
NOT DEFINED. APPROXIMATED FONT TYPES, SIZE, WIDTH, AND SPACING AS PER THE BELOW IMAGE IS
ACCEPTABLE.
"XXXXX" IS THE LAST 5 DIGIT OF TROJAN SYSTEM PART NUMBER, AND "Y" IS CHECK SUM WHICH IS
5.
AUTOMATICALLY GENERATED BY THE LABEL VISION SOFTWARE.
SEE NOTE 5
"SYSTEM DESCRIPTION"
120-240 VAC, 50-60Hz, 1A
"SYSTEM DESCRIPTION"
SERIAL #: 000001
PART #: "B"
"SYSTEM DESCRIPTION"
120-240VAC, 50-60Hz, 1A
MAX
TM
MAX
TM
"UL" OR "CE"
SEE DESIGN TABLE
(2 PL'S)
UV STERILIZER
98HA
ITEM NO
QTY.
ITEM DESCRIPTION
PART NO.
DRAWING NO.
1 1
LABEL, BLANK 3-PART UVMAX GEN2
602919 602919
CHK BY
REV BY
LOG NO.
REVISION DESCRIPTION
REV
DO NOT SCALE DRAWING
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994
DIMENSIONS ARE IN INCHES
TOLERANCES APPLY AS SHOWN BELOW:
REMOVE ALL BURRS, ALL CORNERS R 0.010" OR
BREAK EDGE. CRITICAL CHARACTERISTIC
REV
A
DWG NO.
603038G
DESCRIPTION
LABEL, SYSTEM UVMAX GEN1 4"OD
SCALE: 1:1
SHEET 1 OF 2
SIZE B
N/A
N/A
N/A
A
B
C
1
2
4
5
6
A
B
C
D
6
5
4
3
2
1
HISTORY:
THIRD ANGLE PROJECTION
COPYRIGHT 2008 BY TROJAN
TECHNOLOGIES. ALL RIGHTS
RESERVED. NO PART OF THIS DOCUMENT
MAY BE REPRODUCED, STORED IN A
RETRIEVAL SYSTEM, OR TRANSMITTED
IN ANY FORM, WITHOUT THE WRITTEN
PERMISSION OF
TROJAN TECHNOLOGIES.
CONFIDENTIALITY NOTICE
3020 GORE ROAD, LONDON, ONTARIO, CANADA, N5V-4T7
UNLESS OTHERWISE SPECIFIED:
2 PL DEC
3 PL DEC
ANGLE
MAINTAINED DATA
CHANGES SHALL BE INCORPORATED
ELECTRONICALLY
SolidWorks
DRAWN BY
CL
07-979
D
ZONE
07-979
DGP
CL
A
SHT
DRAWING RELEASED
3
CREATED ON
RELEASE LOG #
2008-01-15
#
MASS: 1.066 lbs
DGP
2008-01-18
DATE
APPD BY
YYYY-MM-DD
425 Clair Road West,
Guelph, ON N1L 1R1 Canada
t. 519 763 1032
t.f. 1 800 265 7246
www.viqua.com
Example label of model PUV-Basic
100
1.2A
Pelican PUV-Basic 120v 3/4NPT
602805
602805
PUV-Basic
3