Instructions / Assembly
8
Pelican Water Systems
877-842-1635, www.pelicanwater.com
Dimensions and Weight
Pressure 40-80 psi (275 kPa - 552 kPa)
Temp 40°F - 100°F (4°C - 38°C)
TDS <2000 mg/L
Chlorine <1.0 mg/L
Turbidity <1 NTU
SDI <5
pH 4-8
Performance Specicaons
Feed water must be potable, municipal water. Must
be free of potenal membrane foulants such as Iron,
Hydrogen Sulde and Manganese.
Membrane Producon 50 GPD
System
Producon 14.61GPD
TDS Rejecon 96.5%
Recovery
1
26.76%
System tested at 50 psig, 750ppm TDS at 77°F.
1
The percentage of the feed water available
as reverse osmosis treated water under
normal operang condions.
Feed Water Requirements
System Specicaons
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfecon before or aer the system.
This system has been designed for installaon by a licensed professional such as a contractor or plumber. Proper compleon of this installa-
on will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly installed systems
could result in water damage due to leaks or ooding.
A. Product water storage tank
B. Tank valve
C. Tank tubing (3/8” white)
D. Air-gap faucet
E. Drain connecon assembly
F. Drain tubing (3/8” white)
G. Quick connect ng
H. Drain tubing (1/4” black)
I. Faucet tubing (3/8” blue)
J. Four-stage desalinator
K. Feed water tubing (1/4” green)
L. Feed valve assembly (with adapter and
shut-o valve).
M. Two-stage remineralizing post-lter
A
B
J
E
F
G
D
K
L
M
I
H
C (not shown)
(behind cover)
System Dimensions
9.72” W x 13.75” D x 15.38” H
( 24.7 x 34.9 x 39.1 cm), 11 lbs. (5 kg.)