Use and Care Manual

PC600-1000 Rev O —
Pelican PC600/PC1000 Premium Whole House Water Filter
© 2017 Enviro Water Solutions, LLC
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 6
www.pelicanwater.com
[phone]
Installation Overview
Figure 1
Pre-Installation
Bypass Valve Installation
Figure 2
The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick
Connect Nuts. Push the Bypass Valve into the head of the Whole House Water Filter with the unthreaded
ends oriented toward the tanks and hand-tighten the Quick Connect Nuts.
Notice:
The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may
result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass
valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to
match the drawing, and push them back down onto the stem.
IN
OUT
19"
Outgoing
Water to
House
Sediment Filter
Incoming
Water
Supply
Wall Wall
Whole House Water Filter
Quick Connect Nut
Red Arrow
Water Filter Head
Whole House
Water Filter
INLET
OUTLET
INLET
OUTLET
Bypass Valve