Use and Care Manual

Pelican WF6/WF10 Iron/Manganese Filter and Salt Free Softener
© 2019 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 21
www.pelicanwater.com
[phone]
Complete the Installation
1. Turn all faucets and spigots off.
2. Press Pressure Release Button on top of Injection Pump.
3. Check for leaks.
4. Peel off the protective plastic wrap from the stainless steel tank jackets.
5. Add the Pelican logo sticker in the desired location on the tank.
6. Wax stainless steel tank jacket(s) with wax provided or any other non-abrasive auto wax a
minimum of 1-2 times per year or as needed based on the installed environment.
Rev T