User's Manual

PELLA
®
INSYNCTIVE
®
INTEGRATED PATIO DOOR SENSOR PRODUCT GUIDE | 13
NOTE: BRIDGE is in sync mode while the orange light is
flashing. BRIDGE will remain in sync mode for 2 minutes.
BRIDGE will then beep, and orange light will turn off to indicate
BRIDGE exited sync mode.
Sliding Patio Doors: To delete LOCK SENSOR from BRIDGE,
unlock and open your patio door slightly, then lock and close
door 2 times within 10 seconds.
Hinged Patio Doors: To delete LOCK SENSOR from BRIDGE,
unlock then lock your patio door 2 times within 10 seconds.
Wait for the light on BRIDGE to flash red and beep 3 times. This
will indicate a successful deletion.
If LOCK SENSOR deletion is unsuccessful, return to Step 3 and
retry the process.
To exit sync mode, press and hold Sync button on BRIDGE until
light stops flashing orange.
WITH HOME AUTOMATION
BRIDGE supports two types of home automation system
Professionally Installed and Do-it-Yourself (DIY) Z-Wave. For
a list of compatible home automation systems and deletion
instructions, visit Insynctive.Pella.com.
ADDITIONAL INSTRUCTIONS (continued)
LIGHT
SYNC
BUTTON
TEST
BUTTON
BRIDGE
HINGED PATIO DOOR
UNLOCKED
LOCKED
SLIDING PATIO DOOR
UNLOCKED
LOCKED