Installation Guide

RIGHT HINGE Install Closers on this side
LEFT HINGE Install Closers on this side
Interior
side of
door
Qty.
8
Closer Base Screw
#10 x 1 1/2-in Pan Head
Right Hinge
Top
Closer
Bottom
Closer
Right Hinge
Rest Against
Back of Hinge
Mounting Rail
APPROX 1.5"
Align Arrow
with Pencil Mark
Actual Size
9
26
27
28
29
30
31
32
Locate the two closer bases
in the closer kit. Remove
and discard the hole plugs.
Determine which side to
install the closers, based on
your hinge installation.
From inside your house,
measure 1-1/2-in down from
the top of the hinge mounting
rail and mark with a pencil.
Measure 1-1/2-in up from the
bottom of the hinge mounting
rail and mark with pencil.
Align the arrow on the closer
base with the mark you made,
and rest the base against the
back of the hinge mounting rail.
Secure base with four closer
base screws. Repeat for
second closer base, aligning
base arrow with your mark.
Break off alignment tabs.