Installation Guide

3
START
Your Installation
2A Place the hinge rail tight against the
left side of door frame and slide to top.
2B Use FIRST hole from top only.
Mark hole with pencil, remove
hinge rail, pre drill and attach
placeholder screw as shown.
Do not tighten all of the way.
2C Leave 1⁄16" to 1⁄8" of screw exposed.
weather
stripping
#8x3/4 in.
painted
1/8 in.
Left Hinge
Orientation
viewed from outside
Right Hinge
Orientation
viewed from outside
LEFT HINGE
Watch for this color
throughout the manual
RIGHT HINGE
Watch for this color
throughout the manual
Right
Hinge
Illustration
Interior
Side
of the
Door
TOP
Determine the side you want your door to hinge.
On the HINGE SIDE, remove hardware drilling template sticker (keep the template
on the latch side). Position edge cover over mortise hole on hinge side of door.
Set Placeholder Screw for Hinge Rail (Left Hinge shown)
1
2