Installation Guide

7
8A Slide expander on door with
slots to the interior.
Install Expander
Screw Covers
8
6B Adjust the expander until the
sweep touches the threshold.
From the interior, drill a 3/32"
hole in the center of each slot.
6C Secure expander with the #6 x 1/2" screws,
located in the handle kit.
1
2
NOTE:
Straight leg towards
outside of rail (marked with a
black line)
Finishing Touches
9
Snap strips into place by anchoring the outer side rst
(Screw covers may need to be trimmed to length).
Start at the top ends and slide nger down strip
while pressing.
#6x1/2 in.