Owner manual

2
PREPARE THE DOOR FOR INSTALLATION
TWO OR MORE PEOPLE WILL BE REQUIRED TO HANDLE THE PANEL AND
FRAME SAFELY.
A. Remove plastic wrap and cardboard packaging from door. Do not remove
plastic shipping spacers. The shipping spacers will help keep the door square
during installation. Do not unlock or open the door until it is fully fastened.
T. Attach the aluminum sill support or wood
blocking to the exterior of the box plate to
support the edge of the door sill. Place the
sill support fl ush with the subfl oor.
EXTERIOR SILL PAN LIP
INTERIOR SILL PAN LIP
1P
1T
ALL DOORS
Standard Brickmould Installation go to Step 3
Applications for Performance Upgrade and HurricaneShield product requires
additional clip installation or screw installation. Clip installation prep is included in
Step 2B. Screw installation steps are included in Step 5.
PERFORMANCE UPGRADE & HURRICANESHIELD DOORS
For HurricaneShield and Performance
Upgrade Applications:
Clearance Holes
In-Swing Sill
Out-Swing Sill
Screw
Location
Out-Swing Sill In-Swing Sill
6"
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
6"
6"
6"
6"
6" 6"
6"
DOUBLE OPERABLE
6"
6"
16"
MAX.
O.C.
2B
6"
6"
16"
MAX.
O.C.
2B
2B
5E
16" MAX
O.C.
16" MAX
O.C.
6"
6"
6" 6"
SINGLE FIXED OR OPERABLE
6"
6"
16"
MAX.
O.C.
6"
6"
16"
MAX.
O.C.
2B
2B
2B
5E
DIAGRAM FOR
PLACEMENT OF
FRAME SCREWS OR
INSTALLATION CLIPS
Note: If grilles or hardware are removed from the door at this time, label them
and store them in a protected area.