OWNER’S MANUAL Tower Fan MODEL: FZ10-18TRB READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
IMPORTANT SAFETY INSTRUCTIONS CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control device. 2. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to the fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse plug.
PART FIGURE 1. Body 2. Rear base 3. Front base 4. Plastic nut 5. Power cord 1 5 2 3 4 Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.
ASSEMBLY INSTRUCTIONS 1. Take out the fan body and the spare parts from the box. Put the front base onto rear base and join them together. (See Fig. 1) 2. Unlock the plastic nut from the fan body. 3. Pass the power cord through the flute, then insert the fan body into the base. (See Fig. 3) 4. Fix the fan body on the base with the plastic nut. (See Fig. 2) Fig.1 The outlet through Fig.2 Fig.3 OPERATION INSTRUCTION I. Remote Controller (Fig.4) a. KEY INSTRUCTION 1.
. “ ” TIMING KEY Press this timer key repeatedly to set the time for air delivery. Increase in increments up to "1-2-3-4-5-6-7-8-9-10-11-12-13-14-15" hours. b. BATTERIES (battery not included in the packaging) 1. Slide the battery compartment Cover. 2. Insert the batteries, and make sure that the batteries are placed as shown in the Fig.5. 3. Slide back the battery cover. NOTES: Use manganese or alkaline batteries of type "AAA". Do not use rechargeable batteries. Fig.5 AAA Battery, 1.5V c.
USER SERVICING INSTRUCTIONS 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 3. Remove fuse carefully. Push the fuse from the other side to remove fuse. 4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse (provided with product.) 5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug. 6. Risk of fire.
customerservice@supportuscenter.
Ceramic Tower Heater Ceramic Tower Heater Ceramic Tower Heater Ceramic Tower Heater 7