Use And Care Manual

 Page 19 
VENT DOOR FILTER
IMPORTANT
Turn unit off before cleaning.
Care and
Cleaning
- If the vent door is open, access
requires the removal of the unit from
the wall sleeve. Clean the vent filter
twice a year or as required.
- Make sure to remove the shipping
screw from the vent door. (see Fig. 9)
- Rotate the vent control lever to open
the vent door. (see Fig. 16)
- Remove four screws from the vent
door filter. (see Fig. 16)
- First pull out the vent door steel wire
from the hole of the vent door, then
take off the vent door and filter. (see
Fig. 16)
- Clean the filter. Dry thoroughly before
replacing.
- Replace the vent door and filter,
reinstall the four screws.
- Removing Air Filter
Pull
up
2 Air Filters
- Replacing Air Filter
Push
down
Vent door
control lever
Vent door
steel wire
Vent door
lter
Screws
Vent door
Fig. 14
Fig. 15
Fig. 16
- Reinsert the vent door steel wire into
the hole of the vent door.