Datasheet

Marking
The products have demonstrated compliance with the
requirements of EN 166:2001 and associated standards and bear
the following marks:
Clear lens 2C-1.2 3M 1 FT
Grey lens 5-3.1 3M 1 FT
+1.50 Clear lens 2C-1.2 3M 1 FT +1.50
+2.00 Clear lens 2C-1.2 3M 1 FT +2.00
+2.50 Clear lens 2C-1.2 3M 1 FT +2.50
Frames 3M BX EN166 FT CE
Use Limitation
•Nevermodifyoralterthisproduct
•Donotusethisproductagainsthazardsotherthanthose
specified in this document.
• Theseproductsarenotsuitableforgrindingorwelding
• Notsuitableforprotectionagainstlargedustparticles
•InaccordancewithEN166:2001safetyspectaclescannotbe
testedandapprovedforuseagainstliquiddroplets.Where
liquid protection is specified a suitable product should be
considered, for example safety goggles.
• Theseproductsarenotdesignedtobewornoverprescription
spectacles
Explanation of Marking
Marking Description
2C-1.2
(EN 170:2002)
UV protection with good colour recognition. This product
conforms to the requirements of the standard, providing UV
protection for the complete specified range (210nm – 365nm).
5-3.1
(EN 172:1994
(as amended))
Sun-glare protection conforming to the requirements of the
standard, providing UV protection for the complete specified
range (280nm – 350nm).
1 Optical class
F
Impact protection against high speed particle at low energy
(45m/s)
T
Tested for impact protection at extreme temperature conditions
-5°C and +55°C
+1.5 0
+2.00
+2.50
Power of magnification (dioptres)
Standards and Approval
This protective eyewear has been shown to meet the basic
safety requirements under Article 10 of the European Community
Directive 89/686/EEC and is thus CE marked.
These products have been examined at the design stage by
INSPECInternationalLtd.,56LeslieHoughWay,Salford,Greater
Manchester, M6 6AJ, United Kingdom (Notified Body number
0194). These products are tested and CE approved against
EN166:2001.
Important Notice
3M does not accept liability of any kind, be it direct or
consequential (including, but not limited to, loss of profits,
business and/or goodwill) arising from reliance upon any
information herein provided by 3M. The user is responsible for
determining the suitability of the products for their intended
use. Nothing in this statement will be deemed to exclude or
restrict 3M’s liability for death or personal injury arising from its
negligence.
EU_Master_01
15365
3M and BX are trademarks
of 3M company.
Please recycle. © 3M 2013.
All rights reserved.
Personal Safety Division
EMEA Region
3M Centre,
Cain Road, Bracknell
BerkshireRG128HT
United Kingdom
Tel: [phone]
www.3M.eu/Safety