User Manual

www.amazon.com/shops/PEMENOL [e-mail]
mode, or trigger charge deception function at fast charge protocol selection mode;
Long press is used to set default ON or OFF for next re-power at display mode.
 SW Button: Short press to switch display output voltage and output current; or
trigger charge deception function at fast charge protocol selection mode. Long
press is used to switch display output current, output power and capacity
statistics.
 TRIG Button: Short press to select fast charging protocol. Long press to enter or
exit the fast charge protocol selection interface.
 CV Potentiometer: Adjust output voltage, increase the output voltage when
rotating clockwise. Please rotate the CV potentiometer 10 turns in
counterclockwise if the output voltage cannot be adjusted.
 CC Potentiometer: Adjust output current, Increase the output current when
rotating clockwise. Note:It is not keeping a fixed output current; When the load
current reaches the set current value, the module starts to fix output the current
value. Short circuit output terminal when adjust output current.
Green Output indicator. It will turn ON when there is a output at output
terminal, Otherwise it is OFF.
Red Constant current output indicator. It enters the constant current
state when the load current reaches the set current and CC constant current indicator
turns ON.
FC LED: Blue Fast charge deceiving indicator. It will turn ON when Fast charge
protocol function is successful.
Input and output
Input terminal: Four input methods:
 Standard Type A USB Male. It just can input DC 5V.
 Micro USB Female.It just can input DC 5V.
 Type-C USB Female.It just can input DC 5V.
 Pads input DC 4.0V-13.0V.
2 output terminal:
 USB female connector
 Quick-connect terminal