User's Manual

Leftclick1
Rightclick2
Middleclick3
Scrollwheel4
Onoffbutton5
DPIswitch6
Bluetoothconnectbutton7
TROUBLESHOOTING
http://www.Penclic.se/troubleshooting
Check the battery.
When the battery needs charging the LED on the mouse will show red. When
the battery is fully charged a green light will be displayed.
Cursor movement may be effected by very glossy surfaces.
Trouble connecting finding the Bluetooth connection, please look at
www.penclic.se/troubleshooting
TECHNICAL SPECIFICATIONS
The supported platforms for Penclic Mouse are all operating systems that support
HID 1.1. These include Windows XP or later, Mac OSX version 10.1 or later and
most Linux/BSD flavors. No extra software/driver installation is needed.
Bluetooth connection
Operates on almost any surface without any pad or tablet.
Implements a 3-buttons and scroll wheel mouse.
AAA 1.2V NiMH Recharging battery (Everyday use last approximately 3
months before charging is needed).
LR 03/AAA/1.5V Alkaline None rechargeable battery can be used. NOTE: DO
NOT RECHARGE
Energy saving mode starts after 10 min, press a button to start.
Wireless reach, minimum 5 metres.
Dpi settings 800-1200-1600.