User's Manual

Technical specifications
·
·
·
The supported platforms for Penclic wireless
Keyboard are all operating systems that
support HID 1.1. These include Windows XP or
later, Mac OSX version 10.1 or later and most
Linux/BSD flavors. No extra software/driver
installation is needed.
Connection USB.
AAA 1.2V NiMH Recharging battery (Everyday
use last approximately 2 months before
charging is needed).
-Charging via USB .
Troubleshooting
· Make sure the Penclic wireless Keyboard USB
connector is firmly attached to the computer’s
USB port.
· Un-plug and re-plug the USB receiver.
· Connect to another USB port.
· LR 03/AAA/1.5V Alkaline None rechargeable
battery can be used. NOTE: DO NOT
RECHARGE.
·
·
Connect to another computer.
Check the battery.
· USB-receiver 2,4GHz.
-Wireless reach, minimum 5 metres
-Connection via USB .
Technical support
· Energy saving mode starts after 10 min, press
a button to start.
· MAC operating systems do not support all the
special functions.
Measurements
· Height: 6 mm (21 mm at top),
Base: 285 x 162 mm.
· Weight: 381g including 1.4m cable.
Should you require additional technical support
with your Penclic®, please use our Web site
(www.penclic.se) for further information or contact
our support group through e-mail. Call Technical
Support during business hours, Central European
time (UTC+1).
Contact
+ 46 8 544 98 995
[e-mail]
5