Sander User Manual

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interface radio rf-meas-interval
133
Cisco IOS Release 12.1(5)XM
show interface radio rf-meas-interval
To display the intervals of the ambient noise and the calibration noise measurements of the radio card
for the specified slot and downstream port numbers, use the show interface radio rf-meas-interval
EXEC command.
show interface slot/dsport rf-meas-interval
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Examples The following example shows how to display the ambient noise and calibration noise measurement
intervals (the default values) for the radio card that is in slot 3, downstream port 0:
Router# show interface r3/0 rf-meas-interval
rf-meas-interval ambient 300
rf-meas-interval calibration 300
Related Commands
slot/dsport Specifies the slot and downstream port numbers of the Cisco uBR7200
series router.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio rf-meas-interval
ambient
Sets the measurement interval of the ambient noise for performing noise
floor statistics functions.
radio rf-meas-interval
calibration
Sets the measurement interval of a calibrated noise source.