Sander User Manual

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
ping docsis
27
Cisco IOS Release 12.1(5)XM
ping docsis
To determine whether a subscriber unit is on the network, use the ping docsis privileged EXEC
command. To disable this function, use the no form of this command.
ping docsis [MAC-address | ip-address]
no ping docsis
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Make sure that you are using a valid MAC or IP address for the radio modem that you want to ping.
Examples The following example shows how to verify if a subscriber unit is on the network:
Router# ping docsis 172.19.0.0
MAC-address Specifies radio modem MAC address.
ip-address Specifies radio modem IP address.
Release Modification
12.1(3)XQ1 This command was introduced.