Sander User Manual

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio metrics-threshold-su
74
Cisco IOS Release 12.1(5)XM
radio metrics-threshold-su
To set threshold values for the radio link to evaluate the performance of the radio link over time, use the
radio metrics-threshold-su interface configuration command. To force the thresholds back to the
default values, use the no form of this command.
radio metrics-threshold-su CERThresh MINCodeword
no radio metrics-threshold-su CERThresh MINCodeword
Syntax Description
Defaults CERThresh has a default value of 10.00 percent, and MINCodeword has a default value of 100.
Command Modes Interface configuration
Command History
Examples The following example shows how to configure the subscriber unit (SU) threshold, such that if more
than 1000 codewords are received and 10.05percent of them are error codewords, the SU is added to the
threshold crossed list:
UBR04(config-if)# radio metrics-threshold-su 1005 1000
Related Commands
CERThresh Specifies the percentage of error codewords threshold.
MINCodeword Specifies the minimum number of codewords to be received by the
subscriber unit.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
show interfaces radio
slot/port
metrics-threshold-bad-su
Displays the subscriber units that crossed the specified threshold.
show interfaces radio
slot/port
metrics-threshold-su
Displays the metrics for the subscriber unit.