Sander User Manual

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio privacy tek grace-time
79
Cisco IOS Release 12.1(5)XM
radio privacy tek grace-time
To configure traffic encryption key (TEK) grace-time data privacy on the wireless network, use the
radio privacy tek grace-time interface configuration command. To deactivate radio privacy, use the no
form of this command.
radio privacy tek grace-time seconds
no radio privacy tek grace-time
Syntax Description
Defaults 600 seconds
Command Modes Interface configuration
Command History
Examples The following example shows how to set the privacy TEK grace-time to 800 seconds:
UBR(config-if)# radio privacy tek grace-time 800
Related Commands
seconds Specifies the privacy TEK grace-time in seconds. The valid TEK grace-time
entries are 300 to 1800.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio privacy enable Activates radio privacy on the wireless link.
radio privacy
mandatory
Activates radio privacy and disallows access for any unencrypted wireless
subscriber units.
radio privacy kek
grace-time
Sets the radio privacy KEK grace-time.
radio privacy kek
life-time
Sets the radio privacy KEK life-time.
radio privacy tek
life-time
Sets the radio privacy TEK life-time.
show radio privacy
kek
Displays the KEK life-time and grace-time values that have been set.
show radio privacy tek Displays the TEK life-time and grace-time values that have been set.