MSDS

ManualsBrandsPennzoil ManualsTools & HardwareATF 32 oz. Dexon III Mercon Lubricant Oil

Pennzoil ATF Type F

MSDS# 9325

Version 2.0

Effective Date 07/07/2008

Material Safety Data Sheet

According to OSHA Hazard Communication Standard, 29 CFR

1910.1200

1/7

Print Date 10/10/2008 MSDS_US

1. MATERIAL AND COMPANY IDENTIFICATION

Material Name

Pennzoil ATF Type F

Manufacturer/Supplier

SOPUS Products

PO BOX 4427

Houston, TX 77210-4427

USA

MSDS Request

: 877-276-7285

Emergency Telephone Number

Spill Information

: 877-242-7400

Health Information

: 877-504-9351

2. COMPOSITION/INFORMATION ON INGREDIENTS

The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346.

Highly refined mineral oils and additives.

3. HAZARDS IDENTIFICATION

Emergency Overview

Appearance and Odour

: May be dyed. Liquid at room temperature. Slight hydrocarbon.

Health Hazards

: Not classified as dangerous for supply or conveyance.

Safety Hazards

: Not classified as flammable but will burn.

Environmental Hazards

: Not classified as dangerous for the environment.

Health Hazards

: Not expected to be a health hazard when used under normal

conditions.

Health Hazards

Inhalation

: Under normal conditions of use, this is not expected to be a

primary route of exposure.

Skin Contact

: Prolonged or repeated skin contact without proper cleaning can

clog the pores of the skin resulting in disorders such as oil

acne/folliculitis.

Eye Contact

: May cause slight irritation to eyes.

Ingestion

: Low toxicity if swallowed.

Other Information

: Used oil may contain harmful impurities.

Signs and Symptoms

: Oil acne/folliculitis signs and symptoms may include formation

of black pustules and spots on the skin of exposed areas.

Ingestion may result in nausea, vomiting and/or diarrhoea.

Aggravated Medical

Condition

: Pre-existing medical conditions of the following organ(s) or

organ system(s) may be aggravated by exposure to this

material: Skin.

Environmental Hazards

: Not classified as dangerous for the environment.

Additional Information

: Under normal conditions of use or in a foreseeable emergency,

this product does not meet the definition of a hazardous

Summary of content (7 pages)

PAGE 1
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet 1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Pennzoil ATF Type F Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA 877-276-7285 MSDS Request : Emergency Telephone Number : 877-242-7400 Spill Information : 877-504-9351 Health Information 2.
PAGE 2
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet chemical when evaluated according to the OSHA Hazard Communication Standard, 29 CFR 1910.1200. 4. FIRST AID MEASURES General Information : Inhalation : Skin Contact : Eye Contact : Ingestion : Advice to Physician : Not expected to be a health hazard when used under normal conditions.
PAGE 3
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet : Additional Advice sand or other suitable material and dispose of properly. Local authorities should be advised if significant spillages cannot be contained. 7.
PAGE 4
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet Hand Protection : Eye Protection : Protective Clothing : Monitoring Methods : Environmental Exposure Controls : health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers.
PAGE 5
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet Vapour density (air=1) Evaporation rate (nBuAc=1) : > 1 (estimated value(s)) : Data not available 10. STABILITY AND REACTIVITY Stability Conditions to Avoid Materials to Avoid Hazardous Decomposition Products : : : : Stable. Extremes of temperature and direct sunlight. Strong oxidising agents.
PAGE 6
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet nominal amount of product required to prepare aqueous test extract). Mineral oil is not expected to cause any chronic effects to aquatic organisms at concentrations less than 1 mg/l. Mobility : Persistence/degradability : Bioaccumulation Other Adverse Effects : : Liquid under most environmental conditions. Floats on water.
PAGE 7
Pennzoil ATF Type F MSDS# 9325 Version 2.0 Effective Date 07/07/2008 According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Material Safety Data Sheet DSL EINECS TSCA All components listed. All components listed. All components listed. SARA Hazard Categories (311/312) No SARA 311/312 Hazards.