MSDS

Pennzoil Platinum SAE 0W-20 Full Synthetic Motor Oil
MSDS# 11738
Version 1.3
Material Safety Data Sheet
Effective Date 02/05/2014
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
3/9
Print Date 07/03/2014 000000016587
MSDS_US
Protective measures
: Avoid contact with skin and eyes. Use appropriate containment
to avoid environmental contamination. Prevent from spreading
or entering drains, ditches or rivers by using sand, earth, or
other appropriate barriers.
Clean Up Methods
: Slippery when spilt. Avoid accidents, clean up immediately.
Prevent from spreading by making a barrier with sand, earth or
other containment material. Reclaim liquid directly or in an
absorbent. Soak up residue with an absorbent such as clay,
sand or other suitable material and dispose of properly.
Additional Advice
: Local authorities should be advised if significant spillages
cannot be contained.
7. HANDLING AND STORAGE
General Precautions
: Use local exhaust ventilation if there is risk of inhalation of
vapours, mists or aerosols. Use the information in this data
sheet as input to a risk assessment of local circumstances to
help determine appropriate controls for safe handling, storage
and disposal of this material.
Handling
: Avoid prolonged or repeated contact with skin. Avoid inhaling
vapour and/or mists. When handling product in drums, safety
footwear should be worn and proper handling equipment
should be used. Properly dispose of any contaminated rags or
cleaning materials in order to prevent fires.
Storage
: Keep container tightly closed and in a cool, well-ventilated
place. Use properly labelled and closeable containers. Store at
ambient temperature.
Product Transfer
: This material has the potential to be a static accumulator.
Proper grounding and bonding procedures should be used
during all bulk transfer operations.
Recommended Materials
: For containers or container linings, use mild steel or high
density polyethylene.
Unsuitable Materials
: PVC.
Additional Information
: Polyethylene containers should not be exposed to high
temperatures because of possible risk of distortion.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits
Material Source Type ppm mg/m3 Notation
Oil mist,
mineral
ACGIH TWA(Inhalabl
e fraction.)
5 mg/m3
Oil mist,
mineral
OSHA Z1 PEL(Mist.) 5 mg/m3
Calcium
Carbonate
OSHA Z1 PEL(Respira
ble fraction.)
5 mg/m3