Package Content Windows 1 1. Picasso Tablet 2 2. Pen 3. Pen Refill x 2 4. Tweezers 3 5. Pen Stand 4 5 Specification • Dimension: 390mm * 263 mm *14mm • Weight: 1078 g • Active area: 10" * 6" • Resolution: - Windows 7, Vista, or XP with tablet driver installed: 4000 LPI - Windows 7, Vista, or XP without tablet driver installed: 2000 LPI • Report rate: 200 +/- 3 Reports/Second • Pen pressure: 1024 levels • Function Mode: Scroll, Zoom, Direction, Auxiliary (From left to right).
• Auxiliary Button: - In Scroll mode: up/down - In Zoom mode: Zoom in/out left/right Volume control - In Direction mode: four direction key Home, End page up, page down, • Macro-Key: 10 • Power source: USB, 5V +/- 5%, l60mA • LED: 4 mode LED (4 Blue LED under the button cap) • Sensitivity Height: 12 mm (12 +/- 2 mm) Hardware Introduction Macro-Key Mode Buttons Circular Touch Pad Circular Touch Pad Express Key Express Key The Picasso Tablet is a multi-functional USB HID digitizer.
The circular touch pad provides the following functions: the mouse's scroll function, volume control function, zoom-in/out function, keyboard four directions key function, and keyboard Page up/down/Home/End key function. Macro-Key There are ten software-shot-cuts named "Macro Keys" on the upper area. You can easily modify or change its setting by using the "MacroKey Manager" software.
2. When / Multimedia button is pressed, the touch pad becomes a zoom-in/out function. And when the Auxiliary button is also pressed, touch-pad becomes a volume-control function. 3. When / Direction button is pushed, touch-pad become as a four direction keys. And when Auxiliary key is also pushed, circular touch-pad becomes a Page up/Page down/Home/ End function. Express Keys The default functionof each Express key is as the indicator on the diagram of previous page.
Installation and Setting - Windows Before Installing Your Tablet 1. You should completely uninstall any other tablet’ s driver. 2. Always install the driver first before plugging your Tablet into the USB. Installation Step 1: Insert the driver disk into your compute's CD-ROM drive. The software installer menu will show up automatically. Step 2: Follow the instructions to install the Picasso tablet and Macro Key Manager. Step 1: Connect your tablet to the PC's USB port. Note: 1.
Setting After installation, you can change the settings of MacroKey Manager by right clicking the icon on the bottom of Window Tool Bar. Then MacroKey Manager menu will appeare.
Tilt Sensitivity: You can customize how far you may tilt the pen so that it will still be recognized by the tablet. We suggest you move the slider to “High”. Tilt Feel: This is where you may customize how sensitive you would like for your tip to be. We suggest you move the slider to “Soft.” Current Pressure: You can see the current pen pressure at this bar when you press the pen against the Picasso tablet. Pen Buttons setting: You can change the function of each button on the pen.
◎ Tablet Preferecnes Setting: Mapping This feature allows you to ‘map’ your tablet to your monitor(s). You may allow the tablet to fit the size of you monitor by clicking “Full Area” or to a particular monitor, and you may also map it to a portion of your monitor. There are 2 modes that are available for your Muse: Pen Mode or Mouse Mode. Pen Mode is recommended for drawing applications, and Mouse Mode is good for navigating on your computer.
◎ Tablet Preferecnes Setting: Express Keys This menu is to configure the 10 “ExpressKeys” on both sides of the Muse tablet. ◎ MacroKey Response Time setting: You can set timer for how long MacroKey function will work. There are 5 different choices; 0, 0.5, 1, 2 and 3 seconds.The timing you choose will determine how long you must hold pen on MacroKey before it activates.You can choose to get the pointing sound or not while the pen tip is pointing on the Tablet.
◎ MacroKey Manager Setting In Macrokey manage, you can easily modify or change its setting as the shortcut keys to, for example, specific websites.
Installation and Setting - Mac Step 1: Insert the driver disk into your compute's CD-ROM drive. Step 2: Click the Pen Pad Tablet Driver icon and follow the installation steps to install Picasso Tablet driver. Step 3: Click Tablet Preference or MacroKey Manager icon to modify their settings.
Setting Open Tablet Preferences or Setting window or Macrokey Setting window from Applications\Penpower Picasso\... ◎ Tablet Preferecnes Setting: Pen Tilt Sensitivity: You can customize how far you may tilt the pen so that it will still be recognized by the tablet. We suggest you move the slider to “High”. Tilt Feel: This is where you may customize how sensitive you would like for your tip to be. We suggest you move the slider to “Soft.
Current Pressure: You can see the current pen pressure at this bar when you press the pen against the Picasso tablet. Pen Buttons setting: You can change the function of each button on the pen. Tip Double Click Distance: This slider determines how long the distance between double clicks is. We suggest to keep it at the default setting. Default Button: This button is to reset all sliders and settings to the “Default” setting.
This feature allows you to ‘map’ your tablet to your monitor(s). You may allow the tablet to fit the size of you monitor by clicking “Full Area” , or to a particular monitor, and you may also map it to a portion of your monitor. There are 2 modes that are available for your Muse: Pen Mode or Mouse Mode. Pen Mode is recommended for drawing applications, and Mouse Mode is good for navigating on your computer.
◎ MacroKey Manager Setting In Macrokey manage, you can easily modify or change its setting as the shortcut keys to, for example, specific websites.
Step 1 How to Replace the Pen Refill Pull out the used pen nib with the Tweezers provided. Step 2 Insert the Pen Refill to the pen. Step 3 Press firmly on a hard surface for 5 seconds till the Pen Refill is locked.
