PENPOWER TOOYA PRO Quick Guide
CONTENTS Package Contents .............................................................................................................1 Hardware Introduction....................................................................................................1 How to change battery and refill.................................................................................................1 PENPOWER TOOYA PRO 12.1"....................................................................................
PENPOWER TOOYA PRO Quick Guide TOOYA PRO has a wide active area design so that you can use it with your wide screen without any distortion problems. And Windows® Vista™ supports pen features such as note taking, handwriting recognition, and gesture recognition to give you the result you want quickly and easily. Just follow this quick guide and enjoy your e-life with our TOOYA PRO.
PENPOWER TOOYA PRO 12.1'' TOOYA PRO 12.1" Active area Outline dimensions Resolution Report rate Pen pressure Reading high LED indicator Power consumption Interface USB cable Support operating system 10" x 6.25" 306x257x9mm 2000 lpi. 125rps 1024 levels Max 10 mm 1 blue LED Max 40mA USB 1.1 (full Speed) 1.5 meters Mac OS X system/Windows 2000/XP/Vista System Requirements PC computer running Windows® 2000/XP/Vista™ or Macintosh© computer running Mac OS X V.10.2.
Setting Up your Tablet PC Find the program to set up your pen: Start -> Control Panel -> Tablet PC setting -> Pen and Input Device. Also, there are several pen training features included. Start -> All Programs -> Tablet PC -> Pen Flick Training -> Personalize handwriting recognition -> Report handwriting recognition errors -> Tablet PC Pen Training Pen functionality available in Window Vista™ Ultimate Version and Office 2007 Pen functionality is built-in in Office 2007 Word, Excel, Outlook and Power Point.
Windows® 2000/XP/Vista™ /Mac OS X V.10.2.8 & higher With Windows® 2000/XP/Vista™/Mac OS X V.10.2.8 & higher, you have to install a driver before the device is plugged to your PC. Once the driver is installed successfully, TOOYA PRO will work. Tablet Settings * Windows® 2000/XP/Vista™ Execute Start -> All Programs -> Tablet ->Tablet Setting. On the About tab, the tablet size can be chosen in centimeters or inches. The model of tablet and version are shown on this page too.
Pen Settings The pen is used like a normal writing pen. On the About tab, make sure the Tracking Mode is set to Pen. Windows® Vista™ Mac OS X * Side Button On the Buttons tab, click Side Button 1 to customize the side button. * Default Settings Side Button 1 = right click Side Button 2 = left double click Pen Point = left click * Pen Offset Value When using the tablet, if you want to use a new pen without restarting the computer, you need to perform the Pen Offset Value setting. 1.
Windows® Vista™ Mac OS X * Click Pressure 1. On the Buttons tab, move the slider up and down to adjust the pen pressure from 0 to 30 (0 is the lightest, and 30 is the heaviest). 2. Click Test to launch the Click Pressure Test writing area. Then you can test if the setting is correct.