User guide

ManualsBrandsPenpower ManualsComputer AccessoriesTOOYA X (Win/Mac)

Driver Installation

◎

Windows Version

1.

Insert the Driver CD into your CD drive and wait until the auto

start window appears. On Windows Vista and Windows 7 you

may confirm the Action by pressing [Continue] if the User

Access Control window appear.

2. Simply follow the steps on the screen and nish the installation

with restarting your system.

◎

Mac Version

1. Insert the Driver CD into your CD drive and wait until the Drive

is loaded.

2. Click on the Tablet Icon and simply follow the steps on the

screen and nish the installation with restarting your system.

Before starting with the driver installation please make sure

that the tablet is not connected to your PC or MAC.

Summary of content (6 pages)

PAGE 1
Driver Installation Before starting with the driver installation please make sure that the tablet is not connected to your PC or MAC. ◎ Windows Version 1. Insert the Driver CD into your CD drive and wait until the auto start window appears. On Windows Vista and Windows 7 you may confirm the Action by pressing [Continue] if the User Access Control window appear. 2. Simply follow the steps on the screen and finish the installation with restarting your system. ◎ Mac Version 1.
PAGE 2
Knowing Your Tablet 1. Working Area: The working area is the active area where the pen responses. The usage is different to mouse usage. The working area is equal with your monitor, you can directly point on the place you like to move the mouse to. If you move the pen to left bottom corner, the pointer on your display directly goes to this point. This makes work much more efficient and much quicker than using a mouse. 2. Marco Key: Please refer to E-manual on CD for Set up guidelines.
PAGE 3
Knowing Your Pen T h e P e n o f TO O YA X Ta b l e t i s t h e connection between your hand and the graphic tablet. Just use and hold the pen like a normal pen. If you move over the tablet in max 10mm distance without touching it you can see the movement of the pointer. The pen tip is like left mouse buttons which also offer double click function. Further, the pen offers two buttons witch can be programmed in Control Panel. After a time it’s necessary to exchange the pen tip.
PAGE 4
Control Panel This paragraph describes the Windows control panel but can be adopt to Mac control panel as well. After driver installation, restart and successful connection of your Graphic tablet you will find a small Tablet Icon in the quick start bar close to your clock. Click on the Icon to open the Control Panel. The Control Panel is divided into 2 main parts 1. Pen: This page offers you a wide range of pen settings to customize the pen to your needs.
PAGE 5
Function Values Tilt Sensitivity Adjusts how sensitive the pen reacts on Normal ~ High tilt. Important if you like to use the pen like a felt pen. Tip Feel Soft ~ Firm Adjusts the sensitivity of the pen tip and see the result in Current Pressure bar. Use [Details] to setup more specific values for the pen tip. Adjusts the function of the two buttons on pen by choosing from drop-down list.
PAGE 6
Function Values Description Mode Pen, Mouse Select if the Tablet should function like a Pen or a Mouse. All Screens, Monitor, Portion Select [All Screens] to define the complete monitor as working area. If you have more than one monitor connected, you can choose [Monitor] and select which monitor is the active one. If you want to define a specific area of the monitor choose [Portion] and select the active area by dragging the red frame under [Working Area Settings] field.