Manual
3-2
WorldocScan X
3-3
3.2 Load Files from Scanner (WorldocScan Pro Scanner)
3.2.1 Scan Directly and Ofine
WorldocScan Pro Scanner is a cordless scanner, allowing you to scan anywhere. No
computer connection is needed to scan. Simply charge it up and then insert your documents to
scan. The scanner scans the documents and save the image into the inner ash immediately.
Note: Please disconnect the scanner to your PC when you scan the documents.
1. Besides inner ash storage, you can insert the memory card or connect the USB ash
drive if you need it.
2. Turn on the scanner power. When the scanner is ready, the status light will stop blinks.
3. Press the power button to select a scanning resolution mode of 300dpi(White) or
600dpi(Blue).
4. Insert your documents in face up, straight, aligned to the left into the Paper Feed Slot.
5. The scanner will detect, feed and scan the page automatically.
6. When scanning is completed, the scanned image will be saved to JPG format in either a
USB ash drive, memory card, or the scanner’s internal memory.
Note: The scanner will detect and use only one destination to store the scanned docu-
ment. The storage preference is USB ash drive > memory card > scanner’s in-
ternal memory.
3.2.2 Calibrate the Scanner
Scanner occasionallly needs calibration to perform at its best. If the scans are showing
lines or black dots, please calibrate your scanner. Please turn on the scanner and insert the
calibration sheet (provided by Penpower) to start automatic calibration.