Owner's manual

PS-75DBDRAG-STRUT · Pro Drag Strut
2010/2011
6
To adjust, follow the procedure as follows (if this procedure is not followed in the recommended
sequence, the intended settings may not be achieved in practice):
To Set Adjusters:
1.) Turn REBOUND Hex full clockwise until it stops.
2.) Turn COMPRESSION Allen full clockwise until it stops.
3.) Turn the COMPRESSION Allen counterclockwise to desired setting.
4.) Turn the REBOUND Hex counterclockwise to desired setting.
5.) During track tuning, simply turn adjusters as needed until the adjuster stops which would signify
you are at the end of the adjustment range.
Adjustment Range: REBOUND (30 Clicks)
The rebound adjustment range is extensive but within the typical tuning window for all chassis and track
conditions. The adjuster has most effect in the 0-5 in/sec velocity range of the strut.
Force (lbs)
-1,400
-1,200
-1,000
-800
-600
-400
-200
0
-1,518.2
142.8
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
0.00 4.75
Velocity (in/sec)
LF -30
RD.CVP
LF -0
RD.CVP
LF -2
RD.CVP
LF -4
RD.CVP
LF -6
RD.CVP
LF -8
RD.CVP
LF -10
RD.CVP
LF -12
RD.CVP
LF -14
RD.CVP
LF -16
RD.CVP
LF -18
RD.CVP
LF -20
RD.CVP
LF -22
RD.CVP
LF -24
RD.CVP
-30
-0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28