Radiator Quick Installation Guide
General Informaon:
1. Unwrap the radiator
• Installaon in Closed Loop—Hot Water Systems Only.
• Max Operang Temperature: 250°F
• NOT for use in Steam Systems.
• The radiator may be mounted so the supply/return connecons can be on the boom right or boom le.
• All supplied ngs have an o-ring gasket seal. They do NOT require addional thread sealant or tape.
CAUTION: Only the supplied (or other Penso approved) ngs should be used to connect the radiator. Using any
other ngs / pipe connecons could result in water leaking and/or home damage. Penso is NOT liable for damages
caused by unapproved ngs and/or improper installaon of supplied ngs.
Penso Panel Radiator Package Contents:
Quick Installaon Guide
Refer to the installaon manual
for detailed instrucons.
• (1) Radiator
• Trim Package
Bag A - (1) Thermostac Insert
Bag B - (1) Air Vent
Bag C - Wall Mounng Bracket Set
Bag D - (2) Reducers
Bag E - (2) 1/2” Pex Fings
Bag F - (2) 1/2” Copper Fings
Bag G - (2) White Escutcheons
(2) White Radsnap Pipe Covers
Make note of the installaon locaon for the
thermostac insert and air vent
Carefully turn the radiator upside down so the top
grill is on the oor
Cut the plasc wrap across the boom side of the
radiator. This will minimize potenal damage.
Remove the plasc wrap and cardboard end caps
from the radiator. Turn the radiator right side up.
Note: Inspect the radiator for possible shipping damage
NOTE: For informaon or quesons outside
the scope of this manual contact a qualied
heang professional for assistance.